Back to blog
Article

Baoding Cement Prefabricated House Specifications

Admin September 18, 2026

There are no universal specifications for cement prefabricated houses in Baoding. All specifications need to be customized and produced according to design drawings, but common specifications include the following aspects:

I. Dimensional Specifications

The dimensional design of cement prefabricated houses in Baoding combines modular and customized approaches, specifically divided into three categories:

  1. Standard Module Sizes:
    • 3m × 6m: Suitable for small temporary buildings such as construction site offices and duty rooms, offering compact space and easy and quick assembly.
    • 4m × 8m: Medium-sized, often used for rural self-built houses, storage buildings, or small shops, balancing functionality and cost-effectiveness.
    • 5m × 10m: Larger space, ideal for family homes, community activity centers, or commercial buildings, meeting long-term usage needs.
  2. Customized Sizes:
    • Width: Typically within the range of 3m to 4m, incremented in units of 10 cm (e.g., 3.1m, 3.2m). Some requirements can exceed conventional limits, such as 7.2m or 7.6m.
    • Length: Flexibly adjusted according to site conditions, such as 6.6m (outer diameter). Some projects support longer customized lengths.
    • Height and Number of Floors: Can be customized as single-story or double-story structures to suit different functional needs.
  3. Component Size Ranges:
    • Wall Panels: Lengths ranging from 2.4m to 6m, widths in modules of 0.6m or 1.2m, and thicknesses from 120mm to 300mm.
    • Large Beams and Columns: Various sizes, determined based on engineering structural design.

II. Quantitative Standards for Material Composition

The compressive, flexural performance, and durability of components are determined by material parameters:

  • Cement Grade: Must meet design strength requirements, directly affecting the hardening speed and final strength of components.
  • Aggregate Particle Size and Gradation: Properly combine coarse and fine aggregates to ensure concrete density and crack resistance.
  • Reinforcement Configuration: Includes the diameter, quantity, spacing of main reinforcement bars, and the arrangement of stirrups, determined through structural calculations to ensure component load-bearing capacity.

III. Standardized Design of Connection Structures

Prefabricated components need to form an integral structure through reliable connections:

  • Reserved Structures: Pre-set holes, exposed reinforcement bars, mortise and tenon joints, or embedded parts at the ends or sides to ensure the accuracy of mechanical interlocking or welding and grouting connections.
  • Precision Requirements: Dimensional and positional deviations at connection points must be controlled within allowable limits to avoid on-site installation errors.

IV. Surface Treatment and Functional Add-on Requirements

Customize surface finishes and additional functions according to usage needs:

  • Surface Treatment: Options include smooth, rough, or decorative textures, affecting building appearance and the adhesion of subsequent processes.
  • Functional Add-ons: Pre-embedded pipeline channels, installation lifting points, or special coatings must be clearly defined in the specifications.