Installation of Mobile Toilet Commode Chair

The installation of mobile toilet commode chairs varies depending on the model and design. Below are the installation methods and precautions for common models:

Installation Steps for YC7813 Commode Chair

1. Unpacking Inspection: Open the packaging box, take out all accessories, and confirm that nothing is missing or damaged.
2. Unfold the Main Frame: Unfold the main frame to its operational state, secure the parking buckles on both sides to ensure structural stability.
3. Install the Wheels:
   • Place a spring washer between the wheel and the front wheel tube, and press down the brake lock to fix the position.
   • Screw the wheel into the front wheel tube, and after installation, check if the spring washer is evenly compressed to prevent loosening.
4. Place the Commode Bucket: Align the commode bucket with the seat plate slide, and push it in smoothly until it is fully engaged.
5. Pre-use Adjustment:
   • Ensure the front wheel brake is locked to prevent movement.
   • The footrest is initially retracted; lower it only after sitting down to avoid tipping over.

Installation Steps for Universal Toilet Seat Chair

1. Initial Assembly: Do not tighten the screws immediately during installation to allow for adjustments.
2. Side-by-side Installation:
   • Install one side first, insert the screws, place the washers (close to the seat plate), and screw in most of the screws but keep them loose.
   • Repeat the process for the other side to ensure symmetry.
3. Final Fixation: Insert the remaining screws, place the washers, and tighten all screws with a tool to ensure structural stability.

Precautions for Installing 'Squat-to-Sit' Chairs

1. Height Adjustment: Utilize the adjustable design at the bottom to independently adjust the height of the four legs using a wrench or similar tool to fit different sizes of squat toilets.
2. Stability Check: Adjust until all four legs are firmly in contact with the ground without wobbling or tilting to prevent tipping over during use.

Key Tips:

• Read the instruction manual carefully before installation to confirm all accessories are present.
• Wear gloves during operation to avoid cuts or pinches.
• Regularly check the tightness of screws and buckles to prevent loosening.
• If wobbling occurs after installation, readjust the wheels or foot pads to ensure balance.