Back to blog
Article

Prefabricated House Column Design

Admin September 17, 2026

The design of columns in prefabricated houses should integrate structural performance, cost-effectiveness, and construction convenience, achieving efficient construction through standardized connections and construction processes, with steel and concrete structures each having their suitable applications.

Column Types and Material Selection

In steel columns, H-section steel is suitable for ordinary residential buildings (such as heavy steel villas up to three stories). It is well-established in processing, has a low cost (15%-30% lower than box columns), and can meet the requirements for unidirectional bending moments. Common specifications range from 200×200 to 400×400, connected using high-strength bolts or welded end plates. Box columns are used in scenarios with large spans (over 8 meters of bay width), heavy loads, or high torsional resistance requirements (such as banquet halls and cantilevered structures). Their closed cross-sections provide high torsional stiffness, and nodes can be made more rigid. Common specifications include 200×200×8 and 300×300×10. In concrete structures, prefabricated concrete columns are widely used in prefabricated concrete structures, assembled with beams, slabs, and other components through reliable connection methods such as mortise-and-tenon joints and nut fixation, forming an overall framework. For example, the Nanjing Jindi Yufang project adopted a prestressed prefabricated concrete assembled integral frame structure system.

Column Connections and Construction Processes

For steel column connections, H-section steel columns commonly use high-strength bolts or welded end plates; box columns require welding internal diaphragms, corbels, or connection plates on the column walls to ensure rigid node connections. Concrete columns are tightly fitted using mortise-and-tenon joints with protrusions and recesses, then secured with nuts, with gaps filled with foam and sealed with cement for rust prevention. In the construction process, columns are prefabricated in factories (such as 5-ton steel or concrete columns), transported to the site, and lifted into place using cranes. After connecting the columns to beams, secondary casting (such as laying steel bars and pouring concrete) is performed to enhance overall integrity. In a South Korean project, plastic sheets were used to retain moisture in the concrete, improving foundation strength, and foam boards were filled between columns for thermal insulation.

Balancing Cost-Effectiveness and Applicability

Ordinary residential buildings should prioritize H-section steel columns to reduce costs; large-span or complex structures can use a combination of box and H-section steel columns to balance performance and cost. Prefabricated concrete columns reduce on-site work through standardized design, shortening construction periods (such as completing a three-story main structure in 14 days). In terms of policies and markets, many regions in China are promoting prefabricated buildings, with Hainan Province aiming for 80% of newly started prefabricated buildings by 2025 and Guangzhou implementing 100% prefabricated buildings on residential land starting in 2026. The export of prefabricated houses has also grown significantly, with Guangzhou Customs reporting exports of movable houses worth 1.4 billion yuan in the first four months of 2026, a year-on-year increase of 38.1%.

Precautions

For corrosion protection, H-section steel requires special treatment at the junctions of flanges and webs; box columns should be equipped with ventilation holes and have their inner walls sprayed with anti-rust paint. During quality inspections, the cross-sectional dimensions, wall thickness, and grades (such as Q355B) of incoming steel materials should be verified, along with accompanying material certificates and test reports.