Mobile Toilet Sewage Pipe Size
The size of sewage pipes for mobile toilets varies depending on the usage scenario and type, with common specifications as follows:

I. Conventional Mobile Toilets
- Toilet Sewage Outlet (Main Pipe): The most common and mainstream specification is dn110mm (110 millimeters), suitable for the vast majority of single-stall or low-usage scenarios, such as tourist attractions and construction sites. This size meets daily sewage disposal needs while being economical.
- Sink Drain Outlet: Typically, a smaller branch pipe of dn50mm (50 millimeters) is used, set independently from the toilet sewage pipe to prevent sewage mixing and ensure a better user experience.
- Water Inlet Pipe: The water supply pipe generally selects dn33mm (1-inch pipe) to ensure a stable water flow supply and meet flushing requirements.
II. High-Frequency Usage Scenarios In multi-stall or high-frequency usage locations, such as shopping malls and train stations, due to high foot traffic and frequent sewage disposal, it is recommended to use sewage pipes ranging from dn110mm to dn150mm. These scenarios require handling large volumes of sewage and enhancing anti-clogging capabilities, so the pipe diameter needs to be appropriately enlarged. For example, a dn150mm pipe can significantly reduce the risk of clogging, but the cost and installation difficulty will increase accordingly.
III. Direct Discharge Type Connected to Septic Tanks If the mobile toilet is directly connected to a septic tank, the sizes of the toilet sewage outlet and sink drain outlet need to be further enlarged:
- Toilet Sewage Outlet: Can be opened up to a 250mm pipe eye to facilitate rapid sewage discharge into the septic tank and reduce residue in the pipe.
- Sink Drain Outlet: It is recommended to use a 160mm pipe eye to ensure smooth discharge of sink wastewater and prevent backflow or odors caused by an excessively small pipe diameter.
IV. Waterless Packaging or Foam Sealing Types These types of mobile toilets adopt special sewage disposal methods and do not require large-diameter sewage pipes:
- Waterless Packaging Type: Collects excreta in biodegradable bags, eliminating the need for sewage pipes. Only a small amount of piping is required for ventilation or a small amount of wastewater discharge.
- Foam Sealing Type: Uses foam to cover the toilet opening, reducing odors and sealing sewage. The diameter of the sewage pipe is usually small, and the main pipe can even be omitted, retaining only the sink drain branch pipe.
Summary: The size of sewage pipes for mobile toilets should be comprehensively selected based on the usage scenario, foot traffic, and sewage disposal method. For conventional scenarios, prioritize using a dn110mm main pipe and a dn50mm branch pipe; for high-frequency or direct discharge scenarios, enlarge the pipe diameter; for waterless or foam sealing types, simplify the pipe design. Reasonable size selection can ensure functionality while controlling costs.




