How to Install a Mobile Toilet Basin

The installation of a mobile toilet basin requires selecting the appropriate method based on its specific type. Common types include dog flushing basins and general mobile toilets. The specific installation steps are as follows:

Installation Method for Dog Flushing Basins

1. Flexible Hose Connection Method

   • Component Preparation: Take out all the product components, including the flexible hose, elbow, and odor-proof rubber ring.
   • Hose and Elbow Connection: Connect one end of the hose tightly to the elbow, ensuring there is no looseness at the joint.
   • Sewage Outlet Connection: Insert the other end of the hose into the sewage outlet of the dog's toilet basin, ensuring sufficient insertion depth to prevent leakage.
   • Drain Connection: Insert the elbow with the odor-proof rubber ring into the indoor drain opening, pressing it in tightly to form a seal and prevent odor from escaping.

2. Direct Connection Pipe Installation Method

   • Hose Connector Handling: Insert the hose connector into the provided elbow, pressing it in tightly and checking for firmness to avoid looseness during subsequent use.
   • Hose Length Adjustment: According to the actual distance between the toilet basin and the drain, use scissors to cut the hose to the appropriate length, keeping the cut end flat.
   • Joint Connection: Insert the cut hose into the sewage outlet of the dog's toilet basin, and insert the elbow at the other end into the indoor drain opening, ensuring a tight connection.
   • Anti-slip Strip Installation: Turn over the toilet basin and insert the transparent anti-slip strips into the bottom sides of the four legs, inserting two anti-slip strips into each leg to enhance stability and prevent the toilet basin from sliding.

Installation Method for General Mobile Toilets

• Component Inspection and Assembly: After receiving the product, first open the package and check the component list to ensure all parts are complete (such as the toilet body, water tank, screws, etc.).
• Instruction Manual or Customer Service Guidance: Assemble the product step by step according to the instruction manual provided with the product, or contact customer service for a detailed installation tutorial. Pay attention to the corresponding positions of each component during assembly to avoid damage caused by forced installation.
• Function Testing: After installation, check that all connections are tight, and test the flushing function by running water to ensure there are no leaks or blockages.

Precautions: Before installation, confirm that the diameter of the drain matches the interface of the toilet basin to avoid installation failure due to size mismatch. If using an odor-proof rubber ring, ensure it completely covers the interface to achieve an odor-proof effect. After installation, regularly check the hose or connectors for aging and replace them promptly to ensure safety during use.