Movement of Toilet Doors at Liyi Hotel

If the toilet doors at Liyi Hotel are sliding doors, their opening methods vary depending on the type of door lock. Here are the common types and steps:

1. Externally Mounted U-shaped Bolt Door
   This type of door features a horizontal metal bolt visible on the outer side of the door frame, designed for manual locking. To open, grasp the middle of the bolt and lift it upwards to the top notch, allowing the lock tongue to disengage from the door frame. Then, gently push the door body to the left or right to complete the opening. Pay attention to the position of the bolt's notch during operation to avoid incomplete unlocking due to insufficient lifting.

2. Hidden Push Door
   If the door lacks a visible handle, it typically employs a design combining a return spring and a magnetic lock. To open, place the palm flat against the middle area of the door panel (about 1.2 meters from the ground) and press inward with slight force until you hear the lock tongue click open. Then, slide the door body horizontally. This type of door relies on pressure to trigger the retraction of the lock tongue, so maintain even pressure during pressing to avoid incomplete disengagement due to insufficient force.

3. Integrated Sliding and Unlocking Smart Door
   Some smart doors have induction modules embedded in the sliding area, requiring specific actions to trigger unlocking. To operate, cover the vertical indented area on the side of the door (about 5 cm wide) with your palm and hold for 2 seconds. Once the green light illuminates, pull naturally. These doors are often equipped with an emergency anti-pinch system. If the door encounters resistance during sliding (e.g., due to an obstruction), it will pause operation to ensure safety.

Emergency Handling: If the door cannot be opened due to a malfunction or operational error, check if there is a triangular emergency knob on the side wall of the door. Rotate this knob 90 degrees counterclockwise to manually release the door lock. The emergency knob is an independent mechanical structure unaffected by the electronic system, suitable for scenarios such as power outages or system failures.

Precautions: Before operation, confirm the type of door lock to avoid damaging the door body or lock due to misoperation; keep the induction area of smart doors clean to prevent dust or water stains from affecting triggering sensitivity; the emergency knob is for emergency use only and should not be touched unnecessarily under normal circumstances.