Prefabricated Beam for Large-Span Houses
The prefabricated beam for large-span houses is a beam body pre-produced in a factory using prestressed or ordinary reinforced concrete technology, designed for use in locations requiring large-span support, such as door and window openings and factory passageways.

Material and Process Characteristics
In terms of materials, high-grade concrete is used along with cold-drawn steel bars or prestressed steel strands. The application of high-performance materials such as lightweight ultra-high-performance concrete (LUHPC) and ultra-high-performance concrete (UHPC) enhances the mechanical properties and durability of the prefabricated beams while achieving structural lightweighting. For example, replacing traditional concrete with UHPC can reduce component size and self-weight while maintaining the same load-bearing capacity. In terms of process, during factory production, the tensioning process is used to pre-stress the steel bars, enabling them to bear tensile forces in advance. This creates bending resistance in the concrete after it is compressed, effectively counteracting the tensile stresses generated by the load and reducing the risk of beam cracking. Modern prefabricated beam production incorporates intelligent circular production lines and digital twin technology, utilizing mobile pedestals, hydraulic molds, intelligent vibration systems, and steam curing processes to achieve full automation of the entire process, from steel bar processing to pouring, curing, tensioning, and grouting.
Design and Construction Considerations
In design, a pre-cambering deepening design technique for prestressed UHPC beams is proposed to address the challenge of controlling installation accuracy for large cantilever beams. During construction, it is essential to ensure sufficient support length at the beam ends, with flat and dense bearing surfaces. Mortar or pads should be filled at the beam bottom to avoid uneven local stress distribution. Since the components are prefabricated in the factory, on-site installation only requires lifting into place, eliminating the need for formwork erection, steel bar binding, concrete pouring, and curing, significantly shortening the construction period.
Technical Advantages
In terms of quality, compared to on-site poured lintels, prefabricated components offer superior curing conditions and quality control. Regarding precision, the use of a splittable and adjustable steel mold design method ensures controllable component processing accuracy. In terms of installation accuracy, the installation accuracy is effectively controlled, ensuring that for a large-span beam with a cantilever length of 15m, the elevation difference between the cantilever end after prestress tensioning and the design elevation does not exceed 5mm.




