Insulation of Interior Walls in Container Houses
Insulation for the interior walls of container houses can be achieved through enclosed insulation methods or surface treatment insulation methods, with specific material selection depending on functional requirements and construction conditions.

The core of enclosed insulation methods is to achieve thermal insulation by filling the interior wall cavities, with commonly used materials including rock wool and expanded perlite boards. Rock wool is made from natural ores such as basalt, melted at high temperatures and formed into a fibrous structure. It has excellent fire resistance (Class A non-combustible) and high-temperature resistance, with a thermal conductivity as low as 0.03-0.04W/(m·K), effectively blocking heat transfer. Its fibrous structure can also absorb sound waves in the air, reducing noise interference, making it suitable for scenarios with high fire and sound insulation requirements, such as temporary office areas or storage facilities. Expanded perlite boards are composed of expanded perlite particles combined with inorganic cementitious materials, with a density of only 60-150kg/m³. They are lightweight and have significant sound absorption effects, with a thermal conductivity of about 0.05-0.07W/(m·K). While meeting basic insulation needs, they can reduce structural loads, making them particularly suitable for living spaces or conference rooms with special sound insulation requirements.
Surface treatment insulation methods achieve thermal insulation by directly applying materials to the interior wall surfaces, with common approaches including plastering, clay walls, or wood panel spraying with insulation materials. Plastering typically uses polystyrene particle mortar, mixing polystyrene foam particles with cement and sand, and applying the mixture to the wall to form a 2-3cm thick insulation layer with a thermal conductivity of about 0.08-0.1W/(m·K). This method is simple to construct and cost-effective, suitable for projects with limited budgets. Clay walls utilize the heat storage properties of natural clay, forming a 5-10cm thick wall through layered compaction. Although their insulation effect is weaker than modern materials, they are highly eco-friendly, suitable for ecological buildings or temporary exhibition halls. Wood panel spraying with insulation materials requires first installing a wooden base layer, then spraying polyurethane or other foaming insulation coatings to form a continuous, seamless insulation layer with a thermal conductivity as low as 0.02W/(m·K). This method offers excellent insulation performance but is more costly, often used in high-end temporary residences or laboratories with strict temperature and humidity control requirements.
Material selection should comprehensively consider functional requirements, cost budgets, and construction conditions. If fire resistance, sound insulation, and insulation are all required, a combination of rock wool filling + plastering surface treatment is an ideal solution. If lightweight and sound absorption are the core requirements, expanded perlite board filling is the preferred choice. For projects with limited budgets and high construction speed requirements, polystyrene particle mortar plastering can be directly used to achieve basic insulation.




