Movement of Hengda Toilet Mirror Cabinet

Careful planning is required for the movement and renovation of the Hengda bathroom mirror cabinet. Here are the specific key points:

1. Size and Door Opening Method Optimization
The total width of the mirror door above the toilet in the Hengda bathroom mirror cabinet is usually between 70-95cm, and the total height is about 116cm. If movement or renovation is required, it is recommended to use a double-door design instead of a single door. The reason is that single doors are too large in size (the width may exceed 45cm) and heavy in weight. Long-term use can easily lead to loose hinges or mirror deformation, affecting durability and safety. Double doors can disperse the weight, reduce single-point stress, and facilitate daily opening and closing operations.

2. Door Frame Material Selection
The material of the mirror cabinet door frame should match the original design. Aluminum alloy is recommended. Aluminum alloy is not only consistent with the original mirror door material of Hengda, but also has significantly better moisture resistance than wooden or plastic materials when near the shower room. The moisture in the shower room can easily cause wooden door frames to mold and deform, while aluminum alloy can effectively resist humid environments and extend service life. In addition, the surface of aluminum alloy can be oxidized to enhance corrosion resistance, making it suitable for long-term exposure in bathroom environments.

3. Hinge Adaptability
The thickness of the board in the Hengda bathroom mirror cabinet is 25mm, while the thickness of conventional woodworking boards is 18mm. This difference directly affects hinge selection. It is necessary to prepare 35-cup-cover door hinges that are suitable for 25mm thickness in advance. If conventional 18mm hinges are used, it will result in excessive gaps between the mirror door and the cabinet body after installation, or problems such as sagging and abnormal noise due to insufficient hinge load-bearing capacity. The cup depth and load-bearing design of the 35-cup-cover hinges can perfectly match the 25mm thick board, ensuring smooth and stable opening and closing of the mirror door.

4. Precautions for Movement and Renovation
If the entire mirror cabinet needs to be moved, it is necessary to check the wall structure in advance:

• Load-bearing wall: Expansion screws can be directly installed to fix the cabinet body to ensure stability.
• Non-load-bearing wall (such as lightweight partition walls): Special wall connectors or additional wooden keels should be used to avoid the risk of the cabinet body falling off.
  In addition, after movement, the opening direction of the mirror door should be readjusted to avoid conflicts with facilities such as the toilet and washbasin, and ensure that there is sufficient space below the mirror cabinet (it is recommended to be ≥15cm) for easy cleaning and maintenance.