Back to blog
Article
Hebi Mobile Environmental Toilet Inspection
Admin September 20, 2026
The inspection of mobile environmental toilets in Hebi mainly refers to the general standards for movable environmental toilets and mobile toilets, covering aspects such as safety, environmental protection, hygiene, convenience, and durability. The specific inspection contents are as follows:

1. Inspection Standards
Inspections should focus on five core indicators:
- Safety: The structure must be stable, with no sharp edges or corners on the materials, and no risk of tipping, collapse, or mechanical injury during use.
- Environmental Protection: Priority should be given to using recyclable or biodegradable materials to reduce chemical pollution, and wastewater treatment must comply with local discharge standards.
- Hygiene: It is necessary to effectively isolate excreta from the external environment to prevent the spread of pathogens, and the ventilation system must maintain fresh air.
- Convenience: It should meet the requirements for rapid assembly, disassembly, and transportation, and the internal operating equipment (such as flushing and lighting) should be simple and easy to use.
- Durability: It must adapt to environmental changes such as temperature differences, humidity, and ultraviolet rays, with no significant performance degradation over long-term use.
2. Inspection Methods
- Structural Strength and Stability Inspection: Test the frame's resistance to deformation by simulating transportation vibrations and loading heavy objects, and evaluate whether the foundation bearing capacity meets the stability requirements for different ground conditions (such as sandy and concrete floors).
- Material Durability Inspection:
- Corrosion Resistance: Expose materials to salt spray and acid-base solutions to observe the degree of surface corrosion.
- Weather Resistance: Evaluate material discoloration and embrittlement through high-temperature (80°C) and low-temperature (-40°C) cycle tests, as well as ultraviolet accelerated aging tests.
- Fire Resistance: Conduct combustion tests in accordance with national standards to ensure that the material's flame-retardant rating meets the requirements.
- Hygiene Performance Inspection:
- Sewage Disposal System: Test the sewage discharge speed and pipeline tightness to prevent leakage.
- Ventilation System: Measure the number of air changes to ensure that the odor concentration is below the hygiene limit.
- Disinfection and Deodorization: Detect the sterilization rate through microbial culture and evaluate the deodorization equipment's removal effect on gases such as ammonia and hydrogen sulfide.
- Convenience and Comfort Inspection:
- Spatial Layout: Measure the internal clear height and蹲位 (squatting position) spacing to ensure that users have no sense of confinement during activities.
- Slip Resistance: Simulate walking on wet floors to test whether the friction coefficient meets safety standards.
- Lighting System: Detect the uniformity of illuminance to avoid shadows or glare affecting use.
- Environmental Performance Inspection:
- Wastewater Treatment: Collect treated water samples and test whether indicators such as COD, BOD, and ammonia nitrogen meet the standards.
- Energy Consumption Evaluation: Calculate the electricity or water consumption per use to evaluate resource consumption efficiency.
3. Inspection Process
Follow the steps of 'sample collection → pre-processing → sub-item testing → data analysis → result evaluation → report output' to ensure that the inspection results are objective and traceable.




