Epidemic Prevention Isolation Mobile Toilet

The epidemic prevention isolation mobile toilet is a modular service unit that integrates sanitation functions, environmental control, and operation and maintenance support, featuring multi-type adaptability, environmental compliance, and advanced technology.

I. Types and Sizes for Diverse Scenarios Epidemic prevention isolation mobile toilets are categorized into four types based on function and scale:

1. Single-Unit Single-Toilet Model: Dimensions of 3m×3m or 2m×3m, providing an independent space for one person, equipped with a sink, suitable for narrow locations, temporary isolation points, and sentry box配套 (supporting facilities).
2. Standard Double-Toilet Model: Dimensions of 3m×6m (20-foot standard container), with separate compartments for men and women, including 2-4 toilet stalls and a washing area, suitable for construction sites, small scenic spots, and other conventional scenarios.
3. Multi-Toilet Combination Model: Dimensions of 6m×6m or 6m×9m (40-foot standard container/double-container combination), including 3-8 toilet stalls, with the option to add accessible toilet stalls, baby care rooms, and other functional compartments, suitable for large-scale events at A-grade scenic spots and municipal squares.
4. Multi-Functional Integrated Model: Integrates toilet stalls, showers, changing rooms, storage, and management rooms, suitable for long-term use scenarios such as construction site living areas and wilderness operation camps.

II. Strict Environmental Standards and Full-Process Technology Coverage

1. Anti-Seepage and Waterproofing: The container body has a waterproof rating of no less than IP65, and the floor must pass a 48-hour closed-water test; the sewage storage tank/septic tank must be corrosion-resistant and anti-seepage, complying with the HJ 2029-2013 standard.
2. Emission Compliance: When connected to the municipal sewer network, it complies with the GB 8978-1996 Level III standard; for on-site reuse without a sewer network, it complies with the GB 18918-2002 Level I A standard; for zero-emission models, fecal matter must meet the GB 7959-2012 harmless treatment requirements; odor emissions comply with the GB 14554-1993 Level II standard, with an indoor ammonia concentration of ≤0.3mg/m³.
3. Water-Saving Technology: Conventional water-flushing models have a single-flush volume of ≤6L, and water-saving models have ≤4L; foam-sealing models consume ≤0.1L of water per use, with biodegradable foaming agents; circulating water-flushing models have a water recycling rate of ≥80%; microbial degradation models achieve zero water flushing, with a fecal degradation rate of ≥90%.

III. Clear Safety and Compliance Requirements

1. Fire Prevention and Electrical: The enclosure material uses Class A non-combustible rock wool sandwich panels, electrical wiring is laid through metal conduits, and the distribution box is equipped with ≤30mA leakage protection devices; each container must be equipped with two 4kg ABC dry powder fire extinguishers and independent smoke detectors.
2. Land Planning: Construction is strictly prohibited in basic farmland, ecological protection red lines, and river management areas; temporary land use requires approval, with a general usage period not exceeding 2 years; placement within urban areas must comply with municipal appearance management regulations and can only be used as temporary structures without property rights registration.

IV. Technology Integration and Operation and Maintenance Support The mobile toilet consists of core sanitation functions (such as vacuum toilet systems and biological degradation systems), environmental control modules (ventilation, lighting, temperature regulation), and an operation and maintenance support network (sewage recovery vehicles, cleaning scheduling systems, GPS positioning management platforms), ensuring efficient operation throughout its lifecycle.