Back to blog
Article
Container House Wall Panel Cutting
Admin September 15, 2026
The cutting of container house wall panels requires consideration of material properties, design specifications, and processing techniques, with core steps including material selection, dimension measurement, cutting, and edge treatment.

1. Material Selection and Property Matching
Common materials for container house wall panels include rock wool sandwich panels, glass wool sandwich panels, polyurethane sandwich panels, and color-coated steel sheets.
- Rock wool/glass wool sandwich panels: These offer fire resistance (Class A non-combustible), thermal insulation, and sound insulation, making them suitable for high-safety scenarios (e.g., construction site dormitories, emergency housing).
- Polyurethane sandwich panels: These provide excellent thermal insulation but require flame-retardant core materials (avoiding flammable EPS polystyrene foam), often used in low-temperature environments or temporary exhibition halls.
- Color-coated steel sheets: These are flat, corrosion-resistant, and commonly used in lightweight structures or rapid assembly scenarios (e.g., mobile homes, sentry boxes), but require internal filling materials to enhance performance.
Key Points: Select materials based on usage scenarios (e.g., fire rating, insulation needs) and ensure compliance with national standards (e.g., JGJ/T 435-2018 load specifications).
2. Dimension Measurement and Cutting Planning
- Standard Dimension Reference: Wall panel dimensions must match container structures (e.g., the internal clear dimensions of a 20-foot standard container are 5867×2330×2350mm). For custom sizes, panel lengths and widths can be adjusted flexibly (e.g., 3m×6m, 3m×8m), but installation gaps (typically 5-10mm per side) must be reserved.
- Cutting Tool Selection:
- Metal wall panels (e.g., color-coated steel sheets): Use plasma or laser cutting machines to ensure smooth, burr-free cuts.
- Sandwich panels: Require dedicated composite panel cutting equipment to avoid damaging the core material structure (e.g., rock wool fiber breakage reducing thermal insulation performance).
Key Points: Verify design drawings before cutting to confirm window/door openings and pre-embedded conduit locations, avoiding secondary processing later.
3. Edge Treatment and Sealing Enhancement
- Rust Prevention: Metal wall panels require anti-rust coating treatment (e.g., zinc powder or epoxy resin spraying) on edges after cutting to prevent long-term corrosion.
- Sealing Reinforcement: Sandwich panel edges must be sealed with aluminum profiles or dedicated adhesive strips to prevent moisture infiltration and core material failure. Joints should use stepped interlocking designs or sealant filling to improve wind and rain resistance.
- Fire Isolation: For high-rise or crowded venues, add fire-resistant adhesive strips at joints and ensure the overall structure meets Class A fire resistance standards.
Key Points: Edge treatment directly affects panel lifespan and must follow process specifications strictly.
4. Processing Precision and Quality Control
- Dimension Tolerance Control: Panel length errors must be ≤±2mm, and diagonal errors ≤±3mm to ensure fit with the frame structure.
- Surface Flatness: Metal wall panel surface irregularities must be ≤1mm/m to avoid deformation or leakage after installation.
- Material Environmental Certification: Require manufacturers to provide environmental testing reports for wall panel materials (e.g., formaldehyde emission, heavy metal content) to ensure safety.
Key Points: Insufficient processing precision may cause installation difficulties or even safety hazards, necessitating trial assembly verification.
Related
You may also like

18Nov
Best Portable Toilet In Stock for Temporary Use: A Buying Guide
Read More
18Nov
Portable Toilet Style: Top Options & Considerations
Read More
18Nov
Portable Toilet Specifications Size Size & Area Guide: Finding the Right Fit
Read More
18Nov
