Back to blog
Article

Special Adhesive for Container Houses

Admin September 15, 2026

For container houses, it is recommended to use two-component polyurethane adhesives (such as Henkel Loctite UK 8208/UK 5400) or neoprene-based sealants (such as Jitai 123 neoprene adhesive). The specific choice should be made based on the application scenario and performance requirements.

I. Two-Component Polyurethane Adhesives

Henkel Loctite UK 8208/UK 5400 is a typical representative. Its core ingredient is polyurethane, which is a mixture of a resin component (containing hydroxyl organic compounds) and a hardener (isocyanate) in a 6:1 ratio. It forms a hard elastic adhesive through a chemical reaction. After curing, there is no significant change in volume, and natural raw materials may lead to color differences between different batches. This adhesive has the following characteristics:

  • Wide bonding range: It can bond pretreated metals, synthetic materials, wood, and rigid foams. It is suitable for the production of sandwich components (such as in vehicles, containers, and the construction industry) and can also be used as a potting, filling, and coating compound.
  • Strong temperature resistance: The operating temperature range is from -20°C to 100°C (some models can reach 190°C), adapting to extreme environments.
  • Flexible curing method: It is a two-component room-temperature curing adhesive that does not require additional equipment, making operation convenient.

II. Neoprene-Based Sealants

Jitai 123 neoprene adhesive is a representative of container-specific waterproof caulking sealants. Based on neoprene, it has the following advantages:

  • High metal affinity: It is naturally compatible with iron, aluminum, and galvanized sheets. It does not require a primer and can bond firmly even if welding slag is not cleaned up.
  • High construction efficiency: It dries quickly (about 10 minutes), does not sag, and can be applied vertically or upside down. It remains elastic from -20°C to 80°C, not cracking in winter and not becoming sticky in summer.
  • Strong durability: It does not come off due to thermal expansion and contraction and remains flexible after three years of exposure to wind and sun. It is suitable for long-term exposed scenarios such as truck panel seams and color steel sheet overlaps.

III. Selection Recommendations

  • Structural bonding requirements: If high-strength, temperature-resistant structural bonding is required (such as for container frame connections), Henkel Loctite UK 8208/UK 5400 should be given priority. Its two-component design ensures volume stability after curing, making it suitable for long-term load-bearing.
  • Sealing and waterproofing requirements: If quick repair of weld seepage or sealing of seams is required (such as for container door frames and roof expansion joints), Jitai 123 neoprene adhesive is more appropriate. Its construction convenience and weather resistance can significantly reduce rework rates.