Installation of Advertising Words on Container Houses

The installation of advertising words on container houses requires selecting appropriate installation methods based on the material characteristics of the container and the type of advertising words, while emphasizing safety and stability. Here are the specific installation points:

I. Pre-installation Preparation
Choose an appropriate installation method based on the material of the container house (such as steel or aluminum) and its surface treatment (such as painting or anti-corrosion coating). For example, steel containers have high surface hardness and are suitable for drilling and fixing; aluminum containers should avoid excessive drilling to prevent structural damage and can prioritize adhesive or internal support installation. Simultaneously, confirm the type of advertising words (such as metal letters, illuminated letters, acrylic letters), as different materials have varying installation process requirements. For example, illuminated letters need to reserve power line interfaces and ensure that the container house has a power supply.

II. Selection of Installation Methods

1. Adhesive Fixing Method: Suitable for lightweight advertising words (such as acrylic letters). First, clean the surface of the container, use double-sided tape or glass glue to fix the back of the advertising words, and then supplement with hot melt glue along the edges to enhance stability. For example, when installing advertising words on the doorhead of an aluminum-plastic panel, you can first use double-sided tape for positioning, then use hot melt glue to fix key points, and finally fill the edges with glass glue.
2. Screw Fixing Method: Suitable for metal letters or heavy advertising words. Drill holes on the surface of the container and fix the advertising words directly with screws. For example, in the external frame installation method, use an impact drill to make holes in the aluminum-plastic panel and fix the letters to the wall with screws. If the container is made of steel structure, use plastic expansion tubes with threaded rods for fixation to prevent screw loosening.
3. Internal Support Installation Method: Suitable for flat illuminated letters or acrylic through-body illuminated letters. Attach double-sided tape to the back衬板 (backing plate) of the advertising words, initially fix them to the wall of the container, supplement the fixed points with hot melt glue, and finally seal the edges with glass glue. This method reduces damage to the surface of the container and is suitable for temporary installations or scenarios requiring frequent replacement.

III. Strengthening Safety and Stability
Container houses are often used in temporary or mobile scenarios, so it is essential to focus on wind and earthquake resistance. For example, illuminated letters installed at high altitudes on glass curtain walls should be fixed by welding steel structures and enhanced with three-level automatic protection devices for stability; giant advertising words on rooftops should adjust the frame structure according to local wind parameters, select weather-resistant metal sheets, and perform multi-layer anti-rust treatment. After installation, regularly check for loose screws and aging adhesive to ensure long-term safety in use.