Cement Prefabricated Antique-Style House

Cement prefabricated antique-style houses are characterized by fast construction speed, superior performance, a wide variety of mold options, and flexible price ranges.

In terms of construction speed: The factory prefabrication process employs a standardized production line, with fully mechanized operations for steel bar binding, mold assembly, and concrete pouring. The production cycle for a single module is only 7 days, with an error margin controlled within 2 millimeters, ensuring high precision and efficiency in production. During on-site hoisting, after being transported to the construction site, with the assistance of a 50-ton crane and an intelligent positioning system, the main structure of a single villa can be installed in 4 hours. A 100㎡ house can be ready for occupancy in just 5 days from an empty lot, significantly shortening the construction cycle and quickly meeting residential needs.

In terms of performance: Structurally, it adopts a full-frame shear wall structure, using C35 concrete paired with Φ14 threaded steel bars. The reinforcement ratio of a single module reaches 1.2%, with a wall thickness of 200mm and a compressive strength of 30MPa, equivalent to being able to withstand 3000 tons per square meter, ensuring a sturdy structure. In terms of connection methods, the modules are combined using prestressed bolts (with a tensile strength of 25 tons) and traditional Chinese timber-frame joint techniques. In a simulated Wenchuan earthquake test, under a seismic intensity of 9 degrees, the overall displacement was only 3cm, demonstrating good earthquake resistance. For other performance aspects, the walls are embedded with EPS insulation layers (with a thermal conductivity of 0.03W/(m・K)), saving 50% on heating costs in winter. The roof is pre-equipped with photovoltaic panel interfaces, and a 200㎡ house can generate up to 3000 kWh of electricity annually, meeting household electricity needs. In a real-world typhoon test in Yangjiang, Guangdong, it withstood a Category 12 typhoon (with a wind speed of 37m/s), with no脱落 (peeling off) of exterior wall tiles and a deformation of the doors and windows of less than 1mm, showing strong wind resistance.

In terms of molds and prices: There are molds for Zhongzhu antique-style wall prefabricated cement houses, with prices starting at ￥1000.00, and a minimum order quantity of 1 set. The suppliers have undergone authenticity verification, and logistics arrangements need to be discussed with the seller after placing an order. In terms of prices, some responsible persons state that the price is over 300 yuan per square meter, with a 70-year warranty. There are also cement panel courtyard wall assembled cement walls and antique-style cement walls, with a price of ￥60.00 for an order quantity of 100 - 499 and ￥58.00 for an order quantity of 500 or more. The price range is relatively flexible, allowing for selection based on needs.