Dimensions of Zhejiang Sanitation Mobile Toilets

The dimensions of sanitation mobile toilets in Zhejiang vary depending on their type, function, and usage scenarios. Common standards are as follows:

I. Basic Dimension Range (Excluding Special Functional Areas)

1. Single-Stall Mobile Public Toilets
   The floor area typically ranges from 1.2㎡ to 1.8㎡, with internal clear dimensions commonly being 1.2m to 1.5m in length × 1.0m to 1.2m in width, and a height between 2.2m and 2.5m. For example, the mobile toilet specifications from Yongkang Xincheng Steel Structure Engineering Co., Ltd. are 1100mm×1100mm×2200mm, and those from Hangzhou Ruitong Environmental Protection Engineering Co., Ltd. are 1100mm×1300mm×2600mm, both falling within this standard range.

2. Multi-Stall Mobile Public Toilets
   Taking double-stall toilets as an example, the floor area is approximately 3㎡ to 4㎡; for three stalls or more, the area increases based on the number of stalls, with each additional stall adding about 1.5㎡ to 2㎡ of usable area. The overall length is mostly between 3m and 6m, with a typical width of 1.5m to 2.5m. A manufacturer in Zhejiang offers multi-stall product specifications including 120cm×150cm×280cm, 120cm×180cm×280cm, and 150cm×180cm×280cm, demonstrating the flexibility in dimensions.

II. Functional Area Dimensions (Including Special Needs)

1. Barrier-Free Stalls
   These must comply with the requirements of the 'Barrier-Free Design Code', with internal clear dimensions not less than 1.8m×1.4m to ensure sufficient turning space for wheelchair users. A barrier-free ramp with a width of not less than 0.8m must be provided at the entrance to facilitate access for those with mobility impairments.

2. Baby Care Rooms/Third Restrooms
   These areas generally have a floor area of not less than 4㎡ and must be equipped with facilities such as baby changing tables and child-sized toilets. The clear width must be ≥1.5m to ensure adequate space for parents to operate and for the reasonable layout of equipment. The design of such functional areas must balance safety and convenience.

III. Other Considerations

• Height Design: The overall height of mobile toilets typically ranges from 2.2m to 2.8m, taking into account the needs for ventilation, lighting, and equipment installation.
• Customization Needs: Some manufacturers can adjust dimensions according to site conditions or usage scenarios, such as shortening the length or increasing the width, but must ensure compliance with basic functional requirements.
• Regulatory Basis: The design of barrier-free and baby care rooms must strictly adhere to relevant national standards to ensure compliance.

The above dimension data represent common specifications for sanitation mobile toilets in the Zhejiang region. In practical applications, specific needs should be discussed and confirmed with the manufacturer.