Yuncheng Mobile Toilet Size Diagram
There is no publicly available specific size diagram for mobile toilets in Yuncheng, but relevant size information is available for reference. The customized specifications for mobile public toilets in Yuncheng are 120016003000 (units: millimeters, the same below), which means a length of 1.2 meters, a width of 1.6 meters, and a height of 3 meters. This specification may be designed for specific scenarios or functional requirements, such as combined public toilets equipped with management rooms, storage rooms, or special sanitation facilities.
In addition to customized specifications, the size ranges of common finished mobile toilets are as follows: 1. Single-person basic model The standard size is 1.1 meters × 1.1 meters × 2.3 meters, and the mini model size is 1 meter × 1 meter × 2.2 meters. These toilets are suitable for areas with low pedestrian traffic, such as temporary event venues or remote scenic spots. They are usually equipped with squat toilets or sit toilets, simple hand-washing basins, and ventilation devices inside.
2. Double-person shared model The length is about 2.5 meters, the width is 1.1 meters, and the height is about 2.3 meters; there is also a saying that the size is 1.8 meters × 1.1 meters × 2.3 meters. This design achieves the coexistence of two toilet pits by increasing the length or optimizing the layout. It is suitable for scenarios with moderate pedestrian traffic, such as parks and construction sites. Some models may be equipped with independent doors or partitions to enhance privacy.
3. Barrier-free mobile toilet The standard size is 1.5 meters × 1.8 meters × 2.4 meters, and there is also a saying that it is 1.8 meters × 1.5 meters × 2.4 meters. These toilets need to meet the requirements for wheelchair turning space (with a diameter of not less than 1.5 meters) and the installation of barrier-free facilities such as handrails and low-position hand-washing basins. They are suitable for places with mandatory regulations on inclusive design, such as hospitals and transportation hubs.
4. Small portable folding model After folding, the size can be reduced to 1 meter × 1 meter × 2 meters. It achieves rapid deployment and storage through a detachable frame or telescopic structure, and is suitable for temporary demand scenarios such as emergency rescue and outdoor exploration.
5. Combined specifications for single and double toilet pits The length of a single toilet pit is usually between 1.2 meters and 1.5 meters, the width is between 1.0 meter and 1.2 meters, and the height is between 2.2 meters and 2.5 meters; the length of a double toilet pit combination may reach 2.4 meters to 3.0 meters, with the width maintained at 1.0 meter to 1.2 meters. These specifications achieve functional expansion through modular design, such as adding management rooms, storage rooms, or third toilets and other ancillary spaces.
When actually purchasing, the size of the mobile toilet needs to be comprehensively determined based on the usage scenario, pedestrian traffic, functional requirements, and transportation conditions. It is recommended to contact the supplier to obtain detailed drawings and technical parameters.
