Yucheng Mobile Toilet Installation

The following general steps and key points can be referred to for the installation of mobile toilets in Yucheng, and specific implementation should be adjusted according to on-site conditions:

I. Pre-installation Preparation

1. Site Survey: Confirm that the installation location meets the requirements, including being within 300 meters of the athlete gathering area, avoiding areas with dense drainage pipes, and reserving at least a 1.5-meter safety passage. At the same time, assess the ground bearing capacity to ensure it can support the weight of the mobile toilet.
2. Foundation Treatment: Choose a pre-treatment method based on the ground conditions. For soil ground, compact it and lay a concrete foundation; for hard ground, clear debris and ensure it is level, and lay anti-slip mats if necessary to enhance stability.

II. Installation Process

1. Base Installation: Place the back panel of the mobile toilet steadily on the ground, adjust the direction of the base so that the sewage outlet aligns with the sewage hole on the back panel, assemble it, install the fixed slot, and drive in the fixing nails to ensure a firm connection between the base and the ground.
2. Panel Assembly: Install the right, left, and front panels in sequence. Align the bottom of the panel with the slot and push it in steadily. After it is fully aligned with the base, install the fixed slot and drive in the fixing nails, paying attention to maintaining the verticality of the panel.
3. Top and Ventilation System Installation: Install the upper fixed slot and push it in until it fits perfectly, then install the ventilation louvers to ensure air circulation. The top should be aligned with the surrounding distances and securely installed with fixing nails to prevent rainwater leakage.
4. Overall Frame Fixation: Work together to erect the toilet frame, check that all components are tightly connected, and use expansion screws or counterweights for further fixation if necessary to ensure overall stability.

III. Water and Electricity Connection and Acceptance

1. Water and Electricity Connection: The sewage pipe should be connected to the municipal sewage network, ensuring a reasonable slope to avoid blockage; the power supply line should be kept away from water sources and equipped with a leakage protection device.
2. Acceptance Criteria:
   • Appearance Inspection: No damage or stains, and clear markings;
   • Function Test: The flushing, lighting, and ventilation systems operate normally;
   • Emergency Preparedness: Equipped with spare toilet paper and hand sanitizer, and a cleaning tool room should be set up.

IV. Cost Reference
The basic installation cost for ordinary mobile toilets (such as steel structure and color steel plate) is approximately 500-2000 yuan. For remote areas, an additional 500-2000 yuan may be charged for freight, and complex installations may require additional labor costs. The specific amount needs to be evaluated based on the material, configuration, and on-site conditions.

Tip: If Yucheng has special environmental requirements (such as low-temperature freeze protection, high-altitude adaptation, etc.), communicate with the supplier in advance to customize a plan to ensure that the equipment meets the usage standards.