Yizhou Cement Prefabricated Houses
Yizhou cement prefabricated houses, represented by Gaochuang cement movable houses, are high-quality temporary buildings constructed using industrial prefabrication technology, offering significant advantages in efficiency, environmental protection, safety, and cost-effectiveness.
1. High Construction Efficiency and Significantly Reduced Construction Period
Cement prefabricated houses adopt a standardized factory production model, where components undergo fully mechanized operations on an assembly line, including steel bar tying, mold assembly, and concrete pouring. The production cycle for a single module is only 7 days, with an error margin controlled within 2 millimeters. During on-site hoisting, with the cooperation of a 50-ton crane and an intelligent positioning system, the main structure of a 200㎡ three-story villa can be installed in 4 hours, and a 100㎡ house can be ready for occupancy in just 5 days from an empty lot. Compared to traditional house construction, the construction period for a 300㎡ house is shortened from 6 months to 1 day, with efficiency increased by 180 times, significantly reducing time costs.
2. Safe and Reliable Structure with Excellent Disaster Resistance
The house adopts a full-frame shear wall structure, with the main body composed of C35 concrete and Φ14 threaded steel bars. The reinforcement ratio of a single module reaches 1.2%, with a wall thickness of 200mm and a compressive strength of 30MPa (capable of withstanding 3,000 tons per square meter). Modules are connected through prestressed bolts (with a tensile strength of 25 tons) and mortise-and-tenon joints similar to those in ancient architecture. In simulated Wenchuan earthquake tests, the overall displacement was only 3cm under a 9-degree intensity shake. Additionally, the walls are embedded with EPS insulation layers (with a thermal conductivity of 0.03W/(m・K)), saving 50% on heating costs in winter; the roof is equipped with reserved interfaces for photovoltaic panels, enabling a 200㎡ house to generate up to 3,000 kWh of electricity annually, meeting household electricity needs. In real-world tests of a Category 12 typhoon in Yangjiang, Guangdong, the exterior wall tiles of the house did not fall off, and the deformation of doors and windows was less than 1mm, demonstrating far superior wind resistance compared to traditional brick houses.
3. Environmentally Friendly and Economical with High Resource Utilization
Compared to traditional house construction, cement prefabricated houses reduce labor costs by 60% (from 60,000 yuan to 24,000 yuan for a 100㎡ house) and construction waste by 98% (from 30 tons per building to 0.5 tons per building). Factory production reduces on-site wet operations, lowering dust and noise pollution, and complying with green building standards. Their modular design supports repeated disassembly and reassembly, making them suitable for temporary building needs, further extending their service life and reducing overall costs.
4. Wide Range of Application Scenarios and Strong Adaptability
The technology for cement prefabricated houses is not restricted by climatic conditions and can be constructed in harsh environments such as low temperatures and rainy seasons. During the COVID-19 response in Shenzhen in 2024, a project constructed 300 isolation wards in 48 hours, reducing the traditional construction period by 90%, demonstrating its emergency response capabilities. Additionally, the houses can be quickly deployed as construction site dormitories, post-disaster relief housing, commercial exhibition halls, etc., meeting diverse needs.
