Back to blog
Article

Prices of Portable Toilets at Construction Sites in Xiaogan

Admin October 02, 2026

The prices of portable toilets at construction sites in Xiaogan vary significantly depending on the material and treatment method. Here are the price ranges for common types:

Classification by Material

  1. Fiberglass Portable Toilets: Prices range from 2400 yuan to 3000 yuan per squat position. These portable toilets are lightweight and corrosion-resistant, suitable for temporary events or short-term use scenarios, with relatively low costs. Their light weight makes them easy to transport and install, making them applicable at construction sites with short project durations and not particularly high requirements for toilet durability.
  2. Color-Steel Plate Portable Toilets: The price range is from 3000 yuan to 3500 yuan per squat position. They have relatively high structural strength and good waterproof performance, often used at construction sites, parks, and other places, with prices slightly higher than those made of fiberglass. The most commonly used basic color-steel single rooms at construction sites cost between 1200 and 1500 yuan. If more than 10 rooms are purchased at once, the unit price can be reduced to just over 1200 yuan. For construction sites with a certain scale of demand, bulk purchasing can save a certain amount of costs.
  3. Carved-Panel Portable Toilets: Prices range from 18000 yuan to 22000 yuan per squat position. They have a beautiful appearance and excellent thermal insulation performance, available in two types: flat-top and pointed-top. Flat-top ones cost between 18000 yuan and 20000 yuan per squat position, while pointed-top ones cost between 20000 yuan and 22000 yuan per squat position. These portable toilets are suitable for scenic spots, commercial areas, and other scenarios with high aesthetic requirements. They are relatively rarely used at construction sites, except for special construction sites with high requirements for image display.

Classification by Treatment Method

  1. Water-Flush Direct-Discharge Type: It relies on the municipal drainage system, has a simple structure, and relatively low prices, but requires supporting upper and lower water pipes. This treatment method is suitable for construction sites with complete drainage facilities nearby.
  2. Waterless Packaging Type: It collects excrement through biodegradable plastic bags, requires no water source, and is suitable for water-scarce areas, with medium prices. At some remote construction sites with scarce water resources, this type of portable toilet can solve water use problems.
  3. Foam Sealing Type: It uses foam to cover excrement to reduce odors, has significant water-saving effects, and prices are slightly higher than those of the waterless packaging type. It is more suitable for construction sites that focus on environmental protection and water conservation and have certain requirements for toilet odor control.
  4. Microbial Degradation Type: It achieves harmless treatment by decomposing excrement through microorganisms, with the best environmental protection performance. However, the technical cost is relatively high, and the price is usually the highest among all types. It is suitable for construction sites with extremely high environmental protection requirements and sufficient budgets.

In addition, some construction sites build toilets themselves to save money, using old iron sheets and wooden frames to piece them together, which only costs 370 yuan. However, the quality is poor, and problems may arise later.