Outdoor Specifications of Mobile Toilets in Linyi

The common outdoor specifications of mobile toilets in Linyi are as follows:

I. Clearly Marked Specifications

1. Specifications in Centimeters

   • 120cm×180cm×280cm: This specification is typically suitable for single-person use scenarios. The width of 120cm provides basic activity space, and the height of 280cm offers ample headroom, making it suitable for outdoor temporary events or small construction sites.
   • 140cm×180cm×280cm: The width is increased by 20cm compared to the former, providing more spaciousness. It is suitable for single-person scenarios with higher comfort requirements or for placing simple equipment (such as a small storage cabinet).

2. Specifications Inferred in Millimeters

   • 1200mm×1500mm×3000mm (i.e., 1.2m×1.5m×3m): This specification may be for double-person or multi-functional toilets. The length and width are significantly increased, allowing for simultaneous use by two people or the installation of separate compartments. The height of 3m accommodates people of different heights, making it suitable for high-traffic scenarios such as scenic spots and large construction sites.

II. General Specifications of Finished Mobile Toilets (May Include Linyi Region)

1. Single-Person Type

   • Regular Model: Length 110cm, width 110cm, height 230cm. It has a compact space, suitable for quick single-person use, and is commonly found at temporary exhibitions or small events.
   • Mini Single-Person Model: Length 100cm, width 100cm, height 220cm. Its size is further reduced, facilitating transportation and rapid deployment, suitable for scenarios with extreme space constraints.

2. Double-Person Type

   • Regular Double-Person Model: Length 180cm, width 110cm, height 230cm. The width is the same as that of the single-person model, and the length is increased to accommodate two people, suitable for families or teams.
   • Shared Double-Person Model: Length approximately 2.5m, width 1.1m, height approximately 2.3m. It has a larger space and may be equipped with separate doors or partition designs to enhance privacy.

3. Barrier-Free Type

   • Regular Barrier-Free Model: Length 180cm, width 150cm, height 240cm. The width is increased to accommodate wheelchair rotation, and the slightly higher height facilitates use by people with mobility impairments, complying with barrier-free design standards.
   • Large Barrier-Free Model: 1.5m×1.8m×2.4m (i.e., 150cm×180cm×240cm). It has a more spacious space and may be equipped with auxiliary facilities such as handrails and low-position sinks, suitable for public places or long-term use scenarios.

4. Portable Foldable Type

   • Small Portable Model: Its size can be reduced to 1m×1m×2m (i.e., 100cm×100cm×200cm). When folded, it has a small volume, facilitating transportation and storage, suitable for emergency or short-term outdoor activities.

III. Suggestions for Specification Selection
The outdoor specifications of mobile toilets in Linyi should be comprehensively selected based on the use scenario, foot traffic, and special needs (such as barrier-free requirements). For example, a temporary construction site may choose the 120cm×180cm×280cm single-person model; scenic spots or large events are recommended to adopt the 1200mm×1500mm×3000mm double-person or barrier-free model to balance efficiency and comfort.