Tongling Prefabricated Concrete House Molds
Information about prefabricated concrete house molds in Tongling is as follows:
Currently, publicly available information does not directly mention detailed product data on prefabricated concrete house molds in the Tongling area. However, a comprehensive analysis can be conducted by combining industry technology with local enterprise developments. Anhui Jiye Construction Engineering Co., Ltd., located in Tongling City, obtained a patent for 'A Processing and Molding Device for Concrete Prefabricated Components in Construction Engineering' in January 2025. This device belongs to the field of concrete prefabricated component processing technology. Its core structure includes a support mechanism, a lower mold, and an upper mold. Through optimized design, it achieves rapid demolding, addressing the issues of numerous demolding steps and low efficiency in traditional devices. This patented technology may be applied to the production of prefabricated concrete house molds, but whether it is directly used for house component molds requires further verification of the enterprise's product line.
From the perspective of general industry classification, prefabricated concrete house molds are mainly divided into two categories: steel molds and plastic molds:
- Steel molds: Made from Q235 steel plates as raw materials, they are manufactured through processes such as laser cutting, welding, and bending. They have high strength and wear resistance, making them suitable for large-scale standardized production, such as the molding of prefabricated wall panels and floor slabs.
- Plastic molds: Mostly use polypropylene (PP) materials and are formed through injection molding processes. They are lightweight and low-cost, suitable for small-batch customized production, such as irregular decorative components or non-standard-sized components.
The typical structure of a mold consists of a bottom mold, side molds, and end molds. When designing, the following requirements must be primarily met:
- Load-bearing capacity and stiffness: It must withstand the lateral pressure and vibration loads during concrete pouring to avoid deformation that could affect the dimensional accuracy of the components.
- Demolding convenience: By optimizing the mold surface finish, setting demolding tapers, or using hydraulic opening and closing mold technology (with a molding cycle of 10-20 minutes), the difficulty of demolding is reduced, and production efficiency is improved.
If you need to obtain information about specific mold suppliers in the Tongling area, you can further contact Anhui Jiye Construction Engineering Co., Ltd. or inquire about resources from the local construction industry association to confirm whether its patented technology has been transformed into house mold products or to learn about the production capabilities of other local enterprises.
