Mobile Toilet Creative Ideas
The creative ideas for mobile toilets mainly include using water storage barrels to make movable toilets, using water storage barrels to make solar-powered mobile toilets, and using two chemical barrels to build mobile toilets. Here are the detailed introductions:
Using water storage barrels to make movable toilets: First, take out a water storage barrel from home and split it in half with an angle grinder. Fix universal wheels at the four corners of a wooden board for easy movement. Take a few wooden strips and fix them on the upper side of the barrel with self-tapping screws to increase the height. Open a door on the side of the water storage barrel, install sponge strips on both sides of the door to form a door frame, and insert plastic soft boards between the wooden strips to form an elevated wall. Place the upper half of the water storage barrel on the top of the wooden strips as a roof and paint the wooden strips with white waterproof paint. Use foam strips to piece together discarded honeycomb wooden boards to make a simple door. Open a hole at the bottom of the barrel and install a drain pipe to form a floor drain. Open holes on the side and bottom of the plastic barrel and connect them with direct joints. Place the plastic barrel on the roof as a small water storage device. Make a bath heater with a water pipe and connect it. Install a three-way joint below the water inlet pipe and connect a shower head. Place the toilet on the drain pipe hole, install the water tank properly and fix it with glass glue, and connect the drain pipe to the sewage barrel. Connect a water pipe horizontally from the three-way joint of the outlet pipe to the door as the water inlet pipe for the washbasin, and open a hole on the door to install a joint and connect a hose.
Using water storage barrels to make solar-powered mobile toilets: Although the specific production process is not detailed, it can be inferred that solar-related equipment, such as solar panels and solar water heaters, are added on the basis of using water storage barrels to make movable toilets. Solar energy is used to provide hot water and other energy sources for the toilet, achieving energy conservation and environmental protection.
Using two chemical barrels to build mobile toilets: Find two large chemical barrels, remove the steel bars on top, and cut off the upper lids of the plastic barrels completely with a cutting machine. Place the two plastic barrels upside down together and fix the upper and lower iron frames. Cut out a door frame size on one side and also cut the inner plastic barrel. Find rectangular iron sheets and fix the gaps between the two plastic barrels with screws. Open holes at the corners of the plastic barrels and install PVC pipes properly. Apply sealant and cut off the excess PVC pipes. Place the toilet on top and install the toilet water tank properly. Fix it well and connect and install the water inlet pipe and the washbasin. Make a shower head with a PVC pipe and connect and install it. Install two wooden doors with hinges and install handles on the doors. Extend and connect the water inlet pipe, lay some water pipes flat at the bottom of the plastic barrels, and connect the drain hole position with water pipes and a septic tank.
