Tianshui Flush Mobile Environmental Toilet
The Tianshui flush mobile environmental toilet is a new type of toilet that combines water conservation, environmental protection, strong adaptability, and self-sufficiency in energy supply, making it suitable for environments such as scenic spots and mountainous areas.
1. Water Conservation and Fecal Waste Treatment Technology
This toilet employs a flushing system that combines compressed air and water flow. A small electric pump creates a circular jet of water inside the ceramic body, with a single flush consuming only 2.1-2.5 liters, approximately 40% less than conventional water-saving fixtures. At the bottom, it is equipped with a vacuum-maintained fecal waste collection tank, molded from high-density polyethylene. Inside, splash guards and guiding slopes are installed to suppress odors and facilitate the natural separation of solid and liquid waste. The collection tank is sealed with a double-layer rubber ring and a mechanical compression device to ensure leak-free transportation. Fecal waste treatment occurs in two stages: the first stage involves sedimentation and acidification in the collection tank, with the addition of microbial agents to decompose cellulose; the second stage connects to the scenic spot's biological treatment station, where an upflow anaerobic sludge blanket process converts organic matter, with the final effluent meeting agricultural irrigation standards, achieving water resource recycling.
2. Mountainous Environment Adaptability Design
The toilet adapts to complex terrains through a multi-point anchoring system. The foundation connectors use a combination of screw piles and adjustable brackets, allowing rapid installation on slopes with a difference of up to 15 degrees without the need for concrete foundation construction. The structural frame is made of aluminum alloy profiles and stainless steel fasteners, with surfaces treated by anodizing and passivation to resist ultraviolet degradation and moisture corrosion, with an overall wind resistance of up to Level 8. Additionally, similar products provided by Cangzhou Hengtai Sanitation Equipment Co., Ltd. feature a distributed steel structure core, with earthquake resistance of Level 8 and wind resistance of Level 10, and wall materials consisting of waterproof foamed insulation materials and high-strength silica panels, further enhancing environmental adaptability.
3. Energy Supply and Electrical Safety
The electricity supply adopts a dual-mode system: photovoltaic panels are installed on the roof, with a daily power generation capacity of up to 1.8 kilowatt-hours, and are equipped with low self-discharge gel battery packs; in rainy weather, it automatically switches to a municipal grid backup interface. The control circuit is equipped with a reverse current protection device to prevent power backflow, and all electrical components comply with the waterproof and dustproof IP65 rating standard, ensuring stable operation in humid environments.
