Shanwei Single Mobile Toilet Specifications
The common specifications of single mobile toilets in Shanwei vary depending on the manufacturer, design type, and functional requirements. They can be divided into the following categories:
1. Specifications of Xigu Manufacturer's Color-Steel Mobile Toilets
The single-person standard size of the color-steel mobile toilets produced by Xigu is 1100×1100×2300 mm (length×width×height). These toilets adopt a lightweight color-steel plate structure, featuring rust resistance and easy cleaning. They are suitable for temporary or semi-permanent scenarios such as scenic spots and construction sites. The size design takes into account the space requirements for adult use. The height of 2.3 meters ensures standing comfort, and both the width and depth exceed 1 meter, ensuring freedom of movement during toilet use.
2. General Specifications for Single-Person Standard Restrooms
According to building codes, the minimum space for a single-person restroom should meet width ≥ 80 cm, depth ≥ 1 m, and height ≥ 2 m. This standard is applicable to the design of basic mobile toilets, ensuring that users can turn around, squat, or sit without restrictions. In actual production, most manufacturers will appropriately expand the size based on this standard to enhance the user experience, such as increasing the depth to more than 1.1 meters to avoid a cramped feeling.
3. Basic Size of Finished Mobile Toilets
The single-person basic size of finished mobile toilets commonly available in the market is 1.1 m×1.1 m×2.3 m (length×width×height). These products often adopt a modular design for easy transportation and assembly. They are usually equipped with a squat toilet or a sit toilet, a ventilation system, and simple lighting inside. The height of 2.3 meters can accommodate conventional exhaust ducts and lighting equipment while avoiding a sense of oppression.
4. Customized Specifications from Huizhou Henglijie
Huizhou Henglijie Industrial Co., Ltd. provides single mobile toilets with a standard size of 115×115×225 cm (length×width×height) and supports size customization. This specification is close to that of Xigu's products, but the height is slightly lower (2.25 meters), possibly saving space by optimizing the internal layout (such as using wall-mounted water tanks). The customization service can meet the needs of special scenarios, such as narrow passageways or height-restricted areas.
Summary: The selection of single mobile toilet specifications in Shanwei should be based on the usage scenario, budget, and user needs. If lightness and cost are priorities, the basic model with dimensions of 1.1 m×1.1 m×2.3 m can be chosen. If long-term use or customized functions are required, the manufacturer can be contacted to adjust the size or configuration. All specifications should ensure compliance with ergonomics to guarantee user comfort and safety.
