Renovation of Mobile Toilets

Renovating mobile toilets can be achieved through DIY methods or by purchasing professional products. Here are the specific plans:

I. Large Plastic Bucket Renovation Plan

1. Basic Structure Construction
   Horizontally cut a large plastic bucket at one-third of its height, retaining the bottom two-thirds as a storage space for waste. After cutting, take a large wooden board and install four universal wheels to enable mobility. Use screws to evenly fix wooden strips around the plastic bucket to form a frame structure.

2. Door and Enclosure Structure Treatment
   Use a cutting machine to vertically cut along the side of the plastic bucket to the bottom, creating an entrance gap. Wrap and fix wooden boards along the edge of the gap to form a door frame. Install aluminum-plastic panels on the extended part of the wooden boards to raise the height of the bucket and improve space utilization. Paint the upper part of the cut plastic bucket with white paint to enhance aesthetics.

3. Functional Component Installation

• Drainage System: Use a hole expander to drill a hole on the side of the bucket bottom and connect a PVC drainage pipe to ensure smooth sewage discharge.
• Water Storage and Cleaning: Use another plastic bucket to make a water storage tank. Install a showerhead through PVC pipe fittings and equip it with a valve switch to control water flow.
• Sanitary Facilities: Install a simple toilet and connect it to a septic tank, while also setting up a sink to form a complete sanitary unit.

II. Chemical Bucket Renovation Plan

1. Bucket Body Combination and Fixation
   Remove the top reinforcement bars of the chemical buckets and completely cut off the lids using a cutting machine. Invert and stack two buckets, and fix them with upper and lower iron frames to ensure structural stability. Cut an opening on the side with the size of a door frame, and simultaneously cut the corresponding position of the inner bucket body to create a through space.

2. Sealing and Reinforcement Treatment
   Cover the gap between the two buckets with rectangular iron sheets and fix them with screws to prevent leakage. Drill holes in the corners of the bucket body to install PVC pipes and apply sealant to ensure airtightness at the connections.

3. Facility Integration

• Sanitary Equipment: Place a toilet and install a water tank, connecting the water inlet pipe and the sink.
• Shower System: Use PVC pipes to make a showerhead, connect it to the water source, and install a valve.
• Door Installation: Use hinges to fix two wooden doors and add handles for easy opening and closing.

III. Professional Product Purchase Plan

There are mature mobile toilet products on the market, such as the color-steel mobile environmental protection toilets produced by Henan Hemai Industrial Co., Ltd. Its core parameters are as follows:

• Material: Color-steel plate/metal carved plate, with strong corrosion resistance.
• Specifications: Available in various sizes such as 1.3×1.3×2.35m and 1.1×1.1×2.35m.
• Environmental Adaptability: Suitable for a temperature range of -35℃ to 100℃, with a voltage of 220V.
• Advantages: Supports custom processing, is cost-effective, and is suitable for scenarios such as construction sites and scenic parks.

Purchase Recommendations: If rapid deployment is required and the budget is sufficient, prioritize purchasing professional products; if you have hands-on skills and are pursuing low costs, you can refer to the DIY plans for renovation.