How Thick Are the Walls of Prefabricated Houses
The wall thickness of prefabricated houses generally ranges from 120 millimeters to 150 millimeters, but the specific thickness needs to be determined according to the usage scenario and functional requirements. The following provides an explanation from three aspects: the conventional range, applications in different scenarios, and special cases.

Conventional Thickness Range
The wall thickness of prefabricated houses usually falls within the 120-millimeter to 150-millimeter range. This range can balance structural strength, thermal insulation performance, and material cost-effectiveness. For example, a 120-millimeter wall is a common choice in heavy industrial buildings. Its thickness can meet load-bearing requirements and adapt to complex stress conditions such as vibrations and impacts that may exist in industrial scenarios. A 150-millimeter wall is mostly used in residential prefabricated houses with high requirements for thermal insulation and sound insulation. By increasing the thickness, it improves thermal performance and reduces energy consumption.
Thickness Differences in Different Scenarios
- Indoor partitions: A 75-millimeter wall is a typical thickness for non-load-bearing indoor partitions. Its lightweight design facilitates quick installation and disassembly while saving indoor space. It is suitable for scenarios such as offices and shops that require flexible space division.
- Exterior wall insulation: 90-millimeter and 100-millimeter walls are commonly used in exterior wall insulation systems. A 90-millimeter wall achieves basic thermal insulation through built-in insulation materials and is suitable for regions with a mild climate. A 100-millimeter wall further enhances thermal insulation by increasing the thickness of the insulation layer or using higher-performance insulation materials. It is suitable for regions that are cold in winter or hot in summer and also meets the load-bearing requirements for the construction of light houses.
- Heavy industrial buildings: A 120-millimeter wall is the mainstream choice for the exterior walls of such buildings. Its thickness can withstand heavy loads such as vibrations from large equipment and cargo stacking. At the same time, it improves impact resistance by optimizing the structural design (such as increasing the reinforcement ratio of steel bars).
Special Cases and Supplementary Information
The "12-centimeter (120-millimeter) wall panels" mentioned by some netizens fall within the conventional thickness range. However, it should be noted that the thickness of prefabricated walls may vary slightly due to production processes and material types (such as concrete and steel-structure sandwich panels). For example, steel-structure prefabricated houses may use thinner walls (such as 90 millimeters) combined with high-efficiency insulation materials to achieve a balance between lightweight design and high performance through structural optimization. In addition, custom walls thicker than 150 millimeters may be used in extreme climate regions or special-function buildings (such as recording studios with extremely high sound insulation requirements), but such cases need to be determined in combination with specific design specifications and engineering requirements.




