Prefabricated House Transport Vehicle

Prefabricated house transport vehicles can be mainly divided into building panel transport vehicles, assembled component transport vehicles, and model toy transport vehicles based on their different uses and types, with significant differences in functions, specifications, and applicable scenarios.

Building Panel Transport Vehicles

These vehicles are specifically designed for transporting prefabricated building components and fall under the category of special-purpose vehicles. Their core feature is the equipped truss-shaped shelves used to secure building panels (such as prefabricated wall panels, floor slabs, etc.), ensuring the stability of the components during transportation. Most of these vehicles are semi-trailers, modified based on standardized automobile chassis, and their technical standards must comply with the "Building Panel Transport Vehicles" (QC/T 447-2019). It should be noted that these vehicles are only permitted to transport non-removable electromechanical equipment or building components and are not allowed to participate in general cargo transportation, reflecting their specialized nature.

Assembled Component Transport Vehicles

These vehicles are the mainstream choice for transporting prefabricated house components, and their specifications need to be flexibly adjusted according to the size of the components:

• Length Adaptability: The length of components typically ranges from 3 to 12 meters or even longer, so the length of the transport vehicle's cargo platform must be ≥ the maximum length of the components. Common vehicle types include:
  • Flatbed/Skeleton Semi-trailers: With cargo platform lengths ranging from 13 to 17.5 meters, such as the "Lightweight Skeleton Transport Semi-trailer" (13.5 meters) produced by Shandong Luhai, suitable for components of conventional sizes;
  • Special Transport Vehicles: Designed for extra-long (>16 meters) or irregularly shaped components, featuring telescopic/removable designs to enhance flexibility;
  • Hook-lift Plate Transport Vehicles: Such as the "Three-axle Hook-lift Transport Vehicle" from Liangshan Feilida, requiring length design optimization based on the distribution of the component's center of gravity.
• Regulatory Restrictions:
  • Total Length Limit: According to the "Regulations on the Implementation of the Road Traffic Safety Law", the total length of trucks shall not exceed 18.1 meters (enclosed van trucks shall not exceed 20 meters, requiring special permission);
  • Over-limit Transport Permit: If the total length of the vehicle (including components) exceeds 28 meters, or the width exceeds 3.75 meters, or the height exceeds 4.5 meters, an "Over-limit Transport Vehicle Permit" must be applied for, and the vehicle must strictly follow the designated route and time for travel.
• Industry Recommendations: The assembled building industry recommends using 13.75-meter or 16.5-meter flatbed semi-trailers to balance efficiency and compliance.

Model Toy Transport Vehicles (SIKU Prefabricated House Transport Vehicle SKUC3562)

These are toy models sold by Kidsland Group, priced at 299.90 yuan with a shipping fee of 7-17 yuan. Founded in 2001, Kidsland specializes in high-quality toys and collaborates with global brands. This model has no actual transport function and is only for collection or children's play, and should be distinguished from real transport vehicles.

In conclusion, the selection of prefabricated house transport vehicles should be based on the type, size, and regulatory requirements of the components to ensure transportation safety and compliance.