Back to blog
Article

Noise Issues in Prefabricated Houses

Admin September 18, 2026

Prefabricated houses may have low-frequency noise issues caused by elevator operations, etc. It is necessary to identify the responsible party and take corresponding measures based on the specific cause.

Noise Sources and Characteristics

Low-frequency noise issues in prefabricated houses are commonly encountered in elevator operation scenarios, especially in top-floor residences. Due to the close proximity between the house structure and the elevator machine room base, vibrations generated during elevator operation are transmitted through the building structure, resulting in low-frequency structural sound transmission. Such noise typically has frequencies of 250Hz and below, featuring strong penetration and slow attenuation. It easily propagates indoors through walls, floors, etc. For example, in a certain case, during nighttime elevator operation in a secondary bedroom of a top-floor residence, the measured sound pressure level in the 250Hz octave band reached 36dB - 37dB, exceeding the nighttime limit of 30dB specified in the 'Emission Standard for Social Life Environmental Noise'. This significantly impacts the sleep and quality of life of the occupants.

Responsibility Identification and Handling Principles

  1. Developer Responsibility: If the noise issue stems from design or installation defects (such as unreasonable machine room location, insufficient vibration reduction measures, etc.), the developer shall bear the primary responsibility. According to relevant regulations, the developer is required to carry out vibration reduction and noise reduction rectifications on the house, such as installing elevator vibration reduction devices, optimizing machine room structures, or adding sound insulation layers, and compensate the owners for losses caused by noise pollution (such as health damage, rental losses, etc.).
  2. Property Management Company Responsibility: If the property management company has fulfilled its daily management obligations (such as regularly maintaining the elevator, promptly reporting noise issues, etc.), it generally does not bear joint liability. However, if noise exceeds the standard due to management negligence (such as failure to repair in a timely manner leading to increased vibration), it shall bear corresponding management responsibilities.

Resolution Suggestions

Owners can first commission a professional institution to test the noise level and confirm whether it exceeds the standard. If it does and the issue stems from design or installation defects, they can request the developer to carry out rectifications and provide compensation. If the issue is related to property maintenance, they can urge the property management company to fulfill its management duties. If negotiations fail, they can seek legal recourse and assert their rights based on the test report and regulations such as the 'Emission Standard for Social Life Environmental Noise'.