Plastic Bucket Mobile Toilet
Plastic bucket mobile toilets can be achieved through various creative renovation methods. Here are the specific renovation approaches:
I. Single Plastic Bucket Renovation When renovating with a single plastic bucket, you first need to prepare materials such as wooden boards, universal wheels, wooden strips, aluminum sheets, white cement, butt hinges, floor drains, valve switches, and shower head clips. First, install four universal wheels in the corners of the wooden board. Use wooden strips to fix and cut the wooden board to create a door frame structure. Insert aluminum sheets to increase the height of the frame and cover the top with the cut-off neck part of the bucket. Apply white cement to the inner wall of the bucket for beautification. Assemble and make the door panel and fix it to the door frame with butt hinges. Drill small holes at the bottom of the bucket to install elbows and floor drains. Use the plastic bucket to drill holes and connect thread reducers, assemble pipes to form a specific shape, and install valve switches and shower head clips. Finally, assemble the toilet tank and connect the sewer pipe to the septic tank. You can also install connecting elbow pipes as needed. This renovation method is relatively simple and has a low cost. It is suitable for individual or small-scale use scenarios but has relatively single functions, mainly meeting basic toilet needs.
II. Double Chemical Bucket Renovation When using two chemical buckets for renovation, first remove the upper steel bars and cut off the entire lids of the plastic buckets with a cutting machine. Place the two plastic buckets upside down together and fix them with upper and lower iron frames. Cut out a door frame size on one side and make corresponding cuts on the inner plastic bucket. Use rectangular iron sheets to fix the gap between the two plastic buckets. Drill holes in the corners of the plastic buckets to install PVC pipes and apply sealant to ensure airtightness. Install the toilet and tank, connect the water inlet pipe and the washbasin, make a shower head with a PVC pipe and connect it to the water pipe to achieve multiple functions such as toilet use, hand washing, and showering. Install two wooden doors and handles, extend and connect the water inlet pipe, lay the water pipe flat to the bottom of the plastic bucket, and connect the drainage pipe to the septic tank. This renovation method has relatively rich functions and can meet various living needs, but the renovation process is relatively complex and requires certain hands-on skills and tools.
III. Simple Toilet Renovation For simple toilets in rural and urban areas, you can use an idle bucket at home and equip it with a bucket toilet seat cushion that has a fixed slot at the back. Just place it on the bucket opening, and it instantly becomes a mobile toilet. This renovation method is the simplest and most convenient with extremely low cost. It is suitable for temporary use or scenarios with low functional requirements, but its comfort and functionality are relatively poor.
