Outdoor Portable Toilet Production and Processing
The production and processing of outdoor portable toilets mainly include methods such as using water storage tanks and pallets, modifying large plastic buckets, and custom processing.
When using water storage tanks and pallets, first fix universal wheels at the four corners of the pallet bottom for easy movement. Then place the water storage tank and use an angle grinder to cut along the marked line on the top to form an open-top tank. Stack two open-top water storage tanks upside down and fix them with self-tapping screws. Cut out a rectangular opening as the door. Drill a hole in the interior floor, insert an elbow and a water pipe, and seal them. Install the toilet and fix it. Fix the water pipe on the wall with clips, install a faucet, connect a stainless-steel basin to make a hand-washing basin, then connect the water inlet pipe of the toilet tank and the shower hose, install the toilet seat and the spray showerhead, and finally make a door with wooden boards and hinges and install a door handle. This method is relatively complex to make, but the structure is relatively stable, and the functions are relatively complete. It is suitable for scenarios with certain requirements for the quality and user experience of portable toilets.
When modifying large plastic buckets, first cut the large plastic bucket at the one-third position and find a large wooden board to install four universal wheels. Fix wooden strips around the plastic bucket with screws, use a cutting machine to cut out a gap as the door, and wrap and fix it with wooden boards to form a door frame. Install aluminum-plastic panels at the extended position of the wooden board to raise the height of the plastic bucket. Process a door with wooden boards and install it on the door frame with hinges. Use a hole expander to drill a hole at the side of the bottom of the plastic bucket to connect and install a drain pipe. Use a small plastic bucket to make a water storage tank and install water pipe connectors. Use PVC pipe connectors and accessories to make a showerhead and install valve switches. Install the showerhead at the water pipe connector position at the bottom of the plastic bucket, extend the hole and install valve switches and tees, connect them to the plastic bucket at the bottom. Install one set of nozzles for cleaning and one set for supplying water to the toilet. When installing the toilet, connect a PVC pipe from the middle of the bottom of the plastic bucket to the septic tank, and separate a water pipe at the water inlet position for installing a hand-washing basin. This method has a relatively low cost and is relatively simple to make. It is suitable for scenarios with a limited budget and low requirements for the functions of portable toilets.
In terms of custom processing, Chongqing Shuda Municipal Facilities Co., Ltd. can carry out custom processing, but it has not detailed its specific production and processing methods. However, this method can produce outdoor portable toilets that better meet the requirements according to the specific needs and site conditions of customers.
