Mobile Toilet Water Pipeline Reservation

Measures for mobile toilet water pipeline reservation and renovation should be taken according to different situations, as follows:

Reserved pipeline interface for toilet sewage outlet and unfilled ground at house handover

If the toilet sewage outlet at house handover has a reserved pipeline interface and the ground is unfilled, about 300 millimeters below the floor level, there is great flexibility for renovation in this case. You can design the positions of the sewage or water drainage interfaces by yourself and freely change the pipeline layout. After modifying the pipeline layout, carry out backfilling to make the ground level again. Then, follow the normal construction process: first, lay the floor to ensure it is solid and level; next, create a waterproof layer, which is a crucial step to prevent toilet leakage. The waterproof layer should be applied evenly without any omissions; finally, lay tiles to make the toilet floor aesthetically pleasing and durable.

Fixed pipeline interface and no elevation difference on the ground after house handover

When the pipeline interface is fixed after house handover and there is no elevation difference on the bathroom floor, which is already level, it is relatively difficult to carry out relocation operations. You need to dig up the ground first and reconnect the original pipeline interface to the relocated position. After backfilling, pay special attention to treating the waterproof layer of the damaged parts. Since digging up the ground will damage the original waterproof structure, if the waterproofing is not redone properly, leakage problems are likely to occur later, affecting the lives of the downstairs residents and causing unnecessary trouble for yourself.

Old houses or unwilling to move the ground pipeline interface

If you have an old house or do not want to move the ground pipeline interface but still want to carry out relocation, you can achieve this by installing a relocator on the original pipeline interface. Relocators are available in building material stores and are relatively easy to install. However, it should be noted that a relocator will slightly reduce the smoothness of sewage discharge. This is because the relocator changes the original direction of the pipeline and increases its curvature, thus creating some obstruction to the flow of sewage. Therefore, when using a relocator, you should comprehensively consider its pros and cons to ensure that it will not have a significant impact on the normal use of the toilet.

Water pipeline renovation for smart toilets

For the water pipeline renovation of smart toilets, the water inlet is generally about 30 centimeters above the ground, and the distance between the water inlet and the toilet is also about 30 centimeters. During the water pipeline renovation, construction should be carried out strictly according to this standard to ensure the normal installation and use of the smart toilet.