Mobile Toilet Seat for Home Bathroom

Here is the information on the installation, selection, and modification of mobile toilet seats for home bathrooms:

Installation Steps for Mobile Toilet (H76 Basic Model)

1. Bottom Anti-slip Treatment: Install silicone anti-slip pads in the four corners of the bottom to ensure stability and prevent sliding when the toilet is placed.
2. Upper and Lower Bucket Assembly: Align the upper and lower buckets and press down on the buckles. After they are locked, tap firmly and check to ensure they are tightly secured to prevent loosening during use.
3. Backrest Installation: Align the holes and press to install the backrest, ensuring a firm connection between the backrest and the bucket.
4. Armrest Installation: First install the backrest buckles, then the front buckles, ensuring the armrest is stable and easy to use.
5. Seat Ring and Lid Installation: Align the seat ring with the holes on both sides and press to secure it. Then align the lid with the seat ring buckles and press to secure it, ensuring smooth opening and closing.
6. Inner Bucket Installation: First install the front handle and then the rear handle, aligning the holes and pressing to facilitate subsequent cleaning and replacement.
7. Tissue Box Installation: Align the holes and install the tissue box, then close the lid for easy access to toilet paper.

Selection Advice for Relocated Toilets

If the toilet in your home has been relocated, the change in pipe position can affect flushing performance. In this case, prioritize direct-flush toilets as they have strong flushing power and better adaptability to relocated pipes, although there are fewer options for direct-flush products on the market. If choosing a siphon-flush toilet, ensure its flushing technology can meet the drainage needs after relocation, as there is a wider range of siphon-flush products available.

Modification Methods for Mobile Toilets

1. Cutting Tile Base: Place the toilet on the tile and draw a mark along the edge. Use an angle grinder to cut out an oval tile as the base.
2. Installing Universal Wheels: Place four sets of universal wheels on the tile and mark their positions. Drill holes and secure them with screws to allow the toilet to move freely.
3. Securing the Toilet: After placing the toilet, mark the position of the drain outlet, connect the hose, and apply white cement along the marked lines to secure the toilet. After it solidifies, move it to the bathroom.
4. Installing the Water Tank and Accessories: Install the water tank and toilet lid, connect the water pipe, and complete the modification of the mobile toilet, which saves space and is easy to move.