Mobile Toilet Production and Installation

There are various methods for producing and installing mobile toilets, with the following being common approaches:

Transformation Using Plastic Buckets

First, build the frame by installing four universal wheels at the corners of the wooden board. Use wooden strips to fix and cut the front of the wooden board to create a suitably sized opening. Wrap the cut edges with wooden strips to form a door frame structure, and insert aluminum sheets to increase the frame height as a barrier. Cover the top with the cut-off neck part, and paint the inner wooden strips with white cement for beautification. Then, make the door panel and fix it to the door frame with screws using butt hinges.

Next, handle the inner bucket. Drill small circular holes at the bottom of the inner bucket and install elbows and floor drains. Place the plastic bucket with pre-drilled holes and threaded reducers at the reserved opening on the top cover. Assemble and拼接 (assemble) it into a shape resembling the Chinese character '日' using three-way straight pipes and elbows. Install a valve switch in the middle, drill holes to connect to the water outlet, and install valve switches and three-way pipes to transfer to the inside of the bucket. Insert screws to fix the clips and place the showerhead. Assemble and拼接 (assemble) the toilet tank and fill the edge gaps with adhesive to maintain a seal.

Finally, make external connections. Connect the outdoor sewer pipes until they are combined with the septic tank. Install connecting elbow pipes and bracket screws on the door for fixation. Cut the bucket from the neck position and wrap the cut edges with a hose.

Production Using Water Storage Tanks and Pallets

First, fix universal wheels at the four corners of the bottom of a plastic pallet. Place water storage tanks collected from garbage stations on the pallet. Use an angle grinder to cut along the marked lines on the top of the water storage tanks to remove the tops and form open-top tanks. Invert another open-top water storage tank and stack it on top of the first one, and fix the outer frames of the two water storage tanks with self-tapping screws.

Cut a rectangular opening with a height of 180 cm and a width of 50 cm on the outer frame of the water storage tank to form a doorway, and cut corresponding openings on the tank body at the same time. Cut a hole in the interior floor of the water storage tank, insert an elbow from the bottom upwards and connect it to a water pipe. Seal the gaps with glue and then cut off the excess water pipe. Place the toilet in alignment with the drainage hole and fix it with glue.

Fix the water pipe on the wall clips and install a faucet. Fix a pipe cap with screws below the faucet, connect the water pipe, and make an opening on the pipe cap. After applying glass glue, fix a stainless steel basin as a sink. Connect the water inlet pipe to the toilet tank, connect the shower hose, and install the shower bracket and toilet seat. Bring wooden boards, fix hinges on the frame of the water storage tank, and fix the other side of the hinges to a wooden box to form the bathroom door. Then, install a door handle on the door.

Structure of Conventional Mobile Toilets

They are composed of a frame structure welded from steel. Generally, the bottom is welded using channel steel or I-beams, and the columns use square steel. Install wall materials on the wall foundation, including color steel plates, fiberglass, stainless steel, and metal carved plates. The frame structure can meet the requirements for hoisting and can be moved and hoisted.