How to Connect Water to Mobile Toilets Outdoors - Diagram Translation

Connecting water to mobile toilets outdoors requires selecting the appropriate method based on the type of toilet. Here are the specific steps:

Steps for Connecting Water to Finished Toilets Outdoors

1. Preparation

   • Identify the Connection Point: The water inlet is usually located on the side of the toilet (mostly on the right side), approximately 20-30 centimeters above the ground. Open the water tank cover and check the type of connection at the bottom of the inlet valve (commonly an external threaded connection).
   • Gather Tools and Materials: Prepare an adjustable wrench or pipe wrench based on the connection type; have Teflon tape (for thread sealing), sealing washers (included with new hoses), a 304 stainless steel explosion-proof hose (4-point universal connection), and rags and buckets for cleaning and water collection.
   • Check the Water Source: Ensure that the water supply point (such as a faucet or angle valve) at the outdoor location is functioning properly and test the water pressure (ordinary toilets require ≥0.05MPa, while tankless smart toilets require ≥0.15MPa). Turn off the water supply valve before operation (if connected to household plumbing, turn off the main household valve).

2. Core Operations

   • Turn Off the Water Supply and Drain: Close the valve at the water supply point and flush the toilet to empty the existing water in the tank.
   • Prepare the Connection and Wrap Teflon Tape: If it is a threaded connection, wrap 4-6 turns of Teflon tape counterclockwise from the root, leaving 2-3 threads unwrapped at the root.
   • Connect the Hose: Connect one end of the explosion-proof hose to the water outlet (such as a faucet) and the other end to the inlet valve connection of the toilet tank, maintaining a natural curve in the hose to avoid kinks.
   • Tighten and Adjust: Tighten the connection by hand and then use a wrench to secure it by half a turn to a full turn, being careful not to overtighten.
   • Test the Water Flow and Check for Leaks: Slowly open the water supply valve and observe for any leaks at the connections, ensuring a smooth water flow.

Steps for Connecting Water to Plastic Mobile Toilets Outdoors

1. Prepare Tools and Materials: Include a water hose, faucet, bucket, and water pump (if the water source is far away).
2. Determine the Water Inlet Point: Choose the water inlet point for the flush tank (to adjust the water level) or the sink (to adjust the water flow) based on needs.
3. Connect the Water Hose: Tightly connect the water hose to the faucet. If using a water pump, connect the hose to the pump and then to the toilet's water inlet point.
4. Turn On the Water: Open the faucet or start the water pump to allow water to flow into the toilet.
5. Adjust and Check: Control the water flow using the faucet switch or regulating valve, check for leaks at all connections, and ensure a smooth water flow.

Precautions:

• Always turn off the water supply valve before operation to avoid leaks or water pressure shocks.
• Ensure the Teflon tape is tightly wrapped and fits snugly to prevent poor sealing.
• Avoid excessive pulling on the hose after connection to prevent breakage.
• Test with a slow water flow to easily detect any leakage issues.