Mobile Toilet Foaming Powder

There are several recommended methods for the mixing ratio of mobile toilet foaming powder, which can be selected and adjusted according to actual needs:

1. 1:2000 dilution This ratio is suitable for scenarios with low foam volume requirements, such as daily maintenance or small mobile toilets. When operating, use a measuring spoon to measure the foaming powder, with each full spoon being approximately 12 grams. Slowly sprinkle it into the water, and after it disperses and dissolves on the water surface, stir thoroughly until the foaming solution is completely transparent. At this ratio, the foam is fine but the quantity is relatively small, which can extend the usage cycle of the foaming solution and is suitable for low-frequency cleaning needs.

2. 1:20 dilution It is recommended to use 10 - 20 times the amount of tap water as the foaming powder (i.e., 10 grams of foaming powder mixed with 100 - 200 milliliters of water). Sprinkle the weighed foaming powder into the water and stir to dissolve. This ratio generates a moderate amount of foam and is suitable for medium-sized mobile toilets or scenarios that require a quick foam replenishment. After stirring, ensure that there are no particle residues in the liquid to avoid clogging the foaming device.

3. 1:50 dilution This ratio allows the use of detergent to replace part of the foaming powder, but the 1:50 ratio must be strictly maintained. For example, 10 grams of foaming powder requires 500 milliliters of water. This method offers high flexibility and is suitable for scenarios with limited resources or where both cleaning and foaming functions need to be considered. Note that the ingredients in the detergent may affect the stability of the foam, so it is advisable to choose a neutral detergent first.

4. 1:80 - 1:100 dilution This range is a commonly used ratio for foam mixtures, and it must be stirred evenly according to the ratio. For example, 10 grams of foaming powder can be mixed with 800 - 1000 milliliters of water. At a high dilution ratio, the amount of foam is relatively large and long-lasting, suitable for large mobile toilets or scenarios with a high density of people. When preparing the solution, it is recommended to use an electronic scale for precise weighing to avoid insufficient foam or overflow due to ratio deviations.

Precautions:

• All ratios need to be fine-tuned according to the actual environment (such as temperature and water quality). In hard water areas, the amount of foaming powder can be appropriately reduced.
• It is recommended to conduct a small-scale test before the first use to observe the foam generation speed, duration, and cleaning effect to determine the optimal ratio.
• When preparing, wear gloves to avoid direct contact of the foaming powder with the skin. If it accidentally gets into the eyes, rinse immediately with clean water and seek medical attention.
• The foaming solution stored for a long time should be sealed to prevent the growth of bacteria, which can lead to a decrease in foam quality.