Mobile Toilet Equipment Manufacturing

There are mainly two ways to manufacture mobile toilet equipment: individual handmade production and factory mass production.

Individual Handmade Production

Individual handmade production of mobile toilet equipment usually involves using common materials and tools, and completing the task through creativity and manual operations. For example, a young man used a water storage tank to make a portable toilet. The specific steps were as follows: First, he used an angle grinder to split the water storage tank in half lengthwise, and fixed universal wheels at the four corners of a wooden board for easy movement. Then, he used wooden strips and self-tapping screws to increase the height of the tank, cut an opening on the side of the water storage tank, installed a sponge strip to form a door frame, and embedded a plastic soft board to create an elevated wall. The upper half of the water storage tank was placed on top of the wooden strips to form a roof. For indoor installations, he cut a hole at the bottom of the tank to install a drain pipe to form a floor drain, cut holes on the side and bottom of a plastic bucket to connect to direct fittings, placed the plastic bucket on the roof to form a small water storage device, connected a water pipe-made bath heater, installed a toilet and a water tank, connected the drain pipe to a sewage tank, and connected a water pipe to the three-way outlet of the drain pipe as the inlet pipe for a washbasin, etc. Another young man used a water storage tank and a pallet to make a portable toilet. First, he fixed universal wheels at the four corners of the bottom of the pallet, placed a water storage tank retrieved from a garbage station, used an angle grinder to cut along the top marking line to remove the top and form an open tank body, stacked two open-top water storage tanks and fixed the outer frame with self-tapping screws, cut a rectangular opening to form a doorway, cut a hole in the internal floor of the water storage tank, inserted an elbow and a water pipe and sealed them, installed and fixed a toilet, fixed a water pipe on the wall clips to install a faucet, connected a washbasin, connected an inlet pipe to the toilet water tank, installed a showerhead, fixed a wooden board to form the toilet door and installed a door handle, etc.

Factory Mass Production

There are many brands of mobile toilet equipment produced by factories in mass quantities, such as Jiasheng, Jiajing Environmental Sanitation, and Renrenjie. Mobile toilets come in various types, including mobile toilets, eco-friendly toilets, and container toilets; they have a wide range of uses, covering public toilets, outdoor toilets, and outdoor restrooms; and they are made of a variety of materials, including stainless steel, steel structures, foam boards, color-coated steel, plastic, fiberglass-reinforced plastic, galvanized steel, galvanized sheets, and aluminum-plastic composite panels. For example, Beijing Zhongjiehui Environmental Sanitation Equipment Co., Ltd. is a modern eco-friendly enterprise specializing in the research and development, production, sales, leasing, and after-sales service of environmental sanitation products. Its products include various series such as Class A tourist public toilets and partitioned mobile toilets.