Mobile House Container Rolling Shutter Door

The price of rolling shutter doors for mobile house containers varies significantly depending on specifications, usage, and region, ranging from 160 yuan to 55,000 yuan. The specific choice should be based on actual needs; installation must follow standard procedures, including track grooving, motor fixing, and limit adjustment.

Price Information

The price of rolling shutter doors for mobile house containers is significantly influenced by size, material, functionality, and customization requirements. For example, the customized price for a rolling shutter door container for a construction site office in Pingyang, Wenzhou, Zhejiang, is 160 yuan per unit, suitable for simple temporary scenarios; while the price for a military-green military container rolling shutter door (30-foot high container standard box) can reach as high as 55,000 yuan, primarily used for special purposes or high-strength requirements. Common price ranges are as follows:

• 160 yuan - 3,000 yuan: Suitable for small, simple scenarios such as construction site access control containers and temporary guard posts. For example, the price of a 20-foot rolling shutter door special storage container in Chaoyang, Liaoning, is 2,500 yuan per unit, and the price of a special container with a rolling shutter door (hazardous waste storage room) in Qingyang, Gansu, is 2,900 yuan per unit.
• 3,000 yuan - 10,000 yuan: Covers medium-scale needs such as commercial storage and logistics transportation. For example, the price of a 40-foot rolling shutter door steel container is 10,000 yuan, and the price of a 20-foot mobile equipment container with a rolling shutter door in Suining, Sichuan, is 2,958 yuan per unit.
• Above 10,000 yuan: Targeted at large-scale, customized, or special-purpose scenarios. For example, the price of a 20-foot creative camp container with three rolling shutter doors is 47,500 yuan, and the price of a motorcycle container (20 feet) is also 47,500 yuan.

Installation Tutorial

The installation of rolling shutter doors must strictly adhere to standards to ensure safety and proper functionality. Key steps are as follows:

1. Track Processing: Groove and punch holes in the track, cutting a length of 5cm, and punch holes at 20cm and 50cm intervals; thread in the brush strip and leave a 2cm margin.
2. Motor Fixing: Fix the center of the motor side plate folding piece at 12cm from the side plate and tighten with screws; when installing the motor beam, keep the holes level and insert the wires downward into the side plate.
3. Track Installation: Align the track with the frame, press the bottom against the brush strip, and fix with screws according to the hole positions; repeat the operation on the other side to ensure symmetry.
4. Limit Adjustment: After inserting the positioning pin to fix the motor, connect the remote control and test the door's ascent; use the limit rod to adjust the limit to prevent damage from excessive operation.

Precautions: Before installation, check the completeness of materials to ensure no defects in the track, motor, and other components; during the debugging phase, test the limit function multiple times to prevent the door from derailing or getting stuck.