Making Mobile Toilets

There are mainly two common and feasible methods for making mobile toilets: using a water storage tank and using a water storage canister along with a pallet. Due to a lack of detailed information, the production process of solar-powered mobile toilets cannot be elaborated on at this time.

Making a Mobile Toilet Using a Water Storage Tank

1. Basic Structure Construction: Take out a water storage tank from home and use an angle grinder to split it in half lengthwise. Fix universal wheels at the four corners of a wooden board for easy mobility. Take several wooden strips and firmly attach them to the upper side of the tank using self-tapping screws to increase the tank's height.
2. Door and Wall Construction: Use the angle grinder again to cut an opening on the side of the water storage tank for the door. Install foam strips on both sides of the opening to form a door frame. Insert a plastic soft board between the wooden strips to create an elevated wall. Place the upper half of the water storage tank securely on top of the wooden strips to serve as the roof. To enhance the interior aesthetics, paint the wooden strips with white waterproof paint.
3. Door Assembly: Use foam strips to拼接 (here, 'assemble' is a more appropriate translation as 'splice' might not fully convey the meaning in this context) two discarded honeycomb wooden boards into a simple door.
4. Drainage and Water System Installation: Use a hole-making tool to create an opening at the bottom of the tank and install a drainage pipe to form a floor drain. Drill holes on the side and bottom of a plastic bucket and connect them with direct fittings. Place the plastic bucket on top of the roof to form a small water storage device. Connect the pipes made for a bath heater. Install a tee fitting below the water inlet pipe and connect it to a showerhead. Place the toilet on the opening of the drainage pipe, install the water tank properly, and secure it with glass glue. Connect the drainage pipe to a sewage tank. Horizontally connect a water pipe to the tee fitting on the outlet pipe and extend it to the doorway to serve as the water inlet pipe for the sink. Drill a hole in the door and install a fitting.

Making a Mobile Toilet Using a Water Storage Canister and a Pallet

Take out a plastic pallet and fix a universal wheel at each of its four bottom corners. Subsequently, other toilet structures such as a toilet bowl and partitions can be installed on this basis. However, this method is relatively simple and only provides a basic mobile framework.