Interior Decoration Requirements for Container Houses
The interior decoration of container houses should be comprehensively designed from aspects such as structural safety, thermal insulation, water and electricity systems, interior decoration, ventilation and lighting, fire safety, foundation treatment, and compliance with standards. The specific requirements are as follows:

1. Structural Safety
It is strictly prohibited to cut main beams or columns without calculation. When opening windows or doors, avoid the original steel columns. Reinforce the openings with 80×80×3mm or 100×100×4mm square tubes. When stacking containers, ensure a firm connection through bolts or welding to avoid structural instability.
2. Thermal Insulation and Waterproofing
- Thermal Insulation: Lay rock wool boards (thickness 50-100mm, thermal conductivity ≤0.041 W/(m·K)) or polyurethane foam boards (30-50mm) on the roof and exterior walls to reduce heat transfer.
- Waterproofing: Use SBS modified bitumen membranes or polyurethane waterproof coatings, with sealed joints. For bathrooms, apply professional waterproof coatings and design a ground slope (≥2%) to guide drainage and prevent water accumulation and leakage.
3. Water and Electricity Systems
- Electrical System: Comply with the 'Civil Building Electrical Design Standard' (GB 51348-2019). Use 2.5mm² copper wires for lighting, and 4mm² or 6mm² wires for sockets and high-power appliances. The wiring should be concealed in PVC pipes, equipped with strong and weak current distribution boxes, switches, sockets, and network ports.
- Water System: Use PPR pipes (S3.2 series) for water supply and install traps for drainage pipes to prevent odors. Conceal or encase pipes in kitchens and bathrooms to ensure water tightness.
4. Interior Decoration and Functional Zoning
- Walls: Options include gypsum board with putty and latex paint, wallpaper, or integrated wall panels (bamboo-wood fiber, aluminum alloy). For an industrial style, retain some corrugated panels and apply paint finishes.
- Ceilings: Design flat or suspended ceilings, embed downlights and light strips, and conceal air conditioning pipes.
- Floors: First level the floor, lay moisture-proof mats and sound insulation layers, and then lay composite wood flooring, SPC stone-plastic flooring, tiles, or terrazzo.
- Functional Zoning: Divide areas according to purpose, such as living areas with bedrooms, bathrooms, and open kitchens; office areas with workstations, meeting rooms, and tea rooms; and commercial areas with bars, display shelves, and cash registers.
5. Ventilation and Lighting
- The window area should be no less than 1/10 of the floor area, or install a mechanical ventilation system (air exchange rate ≥2 times per hour).
- Reasonably arrange window positions, introduce floor-to-ceiling windows and skylights to improve lighting efficiency and reduce a sense of oppression.
6. Fire Safety
Interior decoration materials must meet or exceed Class B1 (flame-retardant) standards. The use of flammable materials is strictly prohibited. The width of evacuation doors should be ≥0.8m, and at least two emergency exits should be provided for areas exceeding 30㎡.
7. Foundation Treatment
Place containers on a concrete foundation (thickness ≥150mm) or steel pads to ensure a flat and solid foundation and avoid uneven settlement.
8. Industry Standards and Regulations
Renovations should comply with the 'Technical Specification for Container Houses' (CECS 334:2013) and the 'Code for Fire Protection Design of Interior Decoration of Buildings' (GB 50222-2017) to ensure design compliance.




