Hubei Modern Mobile Toilet Customization

The customization of modern mobile toilets in Hubei requires selecting the appropriate type and matching technical parameters based on specific needs. The following are common types and key customization points:

Customization of Microbial Mobile Toilets
This type decomposes organic waste through specific microbial communities, with the core lying in the ratio of microbial strains and the choice of carriers. The concentration of microbial inoculation needs to be calculated based on target environmental parameters (such as daily average fecal output and temperature and humidity fluctuation ranges). For example, in high-humidity areas, the proportion of moisture-resistant microbial strains needs to be increased. The carrier material directly affects the stability of the microbial community. Porous ceramics, with their large specific surface area and good air permeability, are often used in high-load scenarios; activated carbon is suitable for areas with high odor control requirements. In addition, the use of a “segmented aerobic system” can dynamically adjust the oxygen supply to maintain the dominance of aerobic microbial communities and inhibit the odor produced by anaerobic fermentation.

Customization of Foam-Type Mobile Toilets
Foam technology achieves water conservation and odor suppression by covering the surface of waste with foam. Customization should focus on the formulation of the foaming liquid and the control logic. In Hubei's hot summers, the stability of the foam needs to be improved (e.g., by adding polymer stabilizers), while in winter, antifreeze components such as ethylene glycol need to be added to ensure the system operates normally in environments ranging from -10°C to 40°C. The control module adopts an “on-demand foaming” mode, using sensors to monitor usage frequency and automatically adjusting the foaming interval (e.g., foaming every 3 minutes during peak periods) and the amount of foam per foaming (adjustable from 50-200ml) to balance resource consumption with hygiene standards.

Customization of Container Mobile Toilets
Container structures offer the advantages of standardization and modularity, with customization focusing on materials and spatial design. The framework is welded from high-density galvanized steel, capable of withstanding wind forces of up to Level 8; the exterior walls use 1.5mm-thick galvanized steel sheets, with a corrosion-resistant lifespan of over 15 years. The internal layout can be adjusted according to needs, such as adding barrier-free access or maternal and infant care stations. Taking the design case of Blogus as an example, a double-container structure (each container measuring 9m×3m×3.2m) completes water and electricity pre-installation in the factory, with on-site assembly taking only 4 hours, significantly shortening the deployment cycle.

Enterprise Services and Technological Innovation
Wuhan Jintongchuang Technology Development Co., Ltd. provides full-process customization services, deeply integrating Internet of Things technology (such as remote monitoring of toilet stall occupancy), lightweight materials (carbon fiber composite panels reducing weight by 30%), and intelligent control systems (automatically adjusting ventilation). Its products use antibacterial panels (with an antibacterial rate > 99%) and solar power systems, with an average daily power consumption of only 0.5 degrees per toilet, meeting the requirements of a circular economy.