How to Use Portable Toilets

The usage methods of portable toilets vary depending on their types and require operation according to specific designs.

I. Water Storage Tank-Modified Portable Toilets
These toilets are typically structurally modified based on water storage tanks, with core components including the toilet bowl, water tank, drain pipe, and sewage tank. The following steps should be followed for use:

1. Install the toilet bowl: Place the toilet bowl above the pre-planned drain pipe hole, ensuring that the bottom of the toilet bowl is aligned with the hole to prevent leakage of waste.
2. Secure the water tank: Install the water tank behind or to the side of the toilet bowl. Use silicone sealant to seal and secure the connection between the water tank and the toilet bowl to prevent the water tank from loosening or leaking.
3. Connect the drainage system: Connect one end of the drain pipe to the toilet's sewage outlet and extend the other end to the sewage tank. Ensure that the pipe is free of bends or blockages to allow waste to flow smoothly into the tank.
4. Configure the water supply system: Use a three-way connector to connect the water inlet pipe to both the showerhead and the sink, forming an independent water supply circuit. When in use, open the water inlet valve to enable showering and handwashing functions.

II. Portable and Movable Toilets
These toilets are designed to be lightweight and suitable for temporary or outdoor use, with the focus of operation being on waste collection and cleaning:

1. Secure the toilet position: Place the toilet on a stable surface and secure it using suction cups or snap-on structures at the bottom to prevent tipping during use.
2. Operate the snap-on device: Open the toilet lid or remove the toilet seat by using the snap-on mechanism to expose the internal flush tank. Some models require manual filling of the tank with water for subsequent flushing.
3. Clean after use: Waste is directly discharged from the toilet into the black water tank (waste collection tank) below. After use, remove the black water tank using the snap-on mechanism or handle, empty the waste into a designated sewage disposal point, clean the black water tank, and reinstall it.

III. Other Types of Portable Toilets
Portable toilets can be classified by structural form into single-unit structures (independent units) and composite structures (multi-unit combinations); by mobility into hoisting types (requiring lifting equipment), handling types (manual or mechanical handling), and powered towing types (connectable to vehicles for towing); and by sewage treatment methods into water-flush types (requiring a water source), waterless suction types (relying on vacuum pumps), and recirculating water-flush types (where sewage is purified and reused). Before use, carefully read the product manual and adjust the operation steps according to the specific design, such as connecting to a water source for water-flush types, regularly cleaning the waste tank for waterless types, and maintaining the filtration system for recirculating water-flush types.