How to Install Curtains in Container Houses

There are multiple fixed methods for installing curtains in container houses, and the appropriate method should be selected based on the wall material and window shape. Here are the specific methods and operating steps:

I. Preparing Tools and Materials

Before installation, prepare tools such as suction cups, hooks, telescopic rods, curtain tracks, pressure rollers, metal clips, nails, and expansion screws. The choice of materials should match the material of the container walls: For metal or thin iron sheets, non-destructive installation methods such as suction cups, hooks, or pressure rollers are preferred; for concrete or plaster walls, expansion screws can be used to fix the tracks; for small windows with light curtains, telescopic rods or suction cups are more convenient.

II. Detailed Explanation of Fixed Methods

1. Suction Cup Fixing Method
   Install a small hook on the top of the suction cup and hang the curtain directly on the hook. Suitable for small windows and light curtains (such as sheer curtains), but ensure the wall surface is smooth without bumps, otherwise the suction cup may fall off.

2. Hook Fixing Method
   Choose round, square, or triangular hooks according to the type of curtain, and fix the hooks on the window frame or wall using metal clips or nails. Highly flexible, it can be paired with different curtain styles, but pay attention to the load-bearing capacity of the hooks.

3. Telescopic Rod Fixing Method
   Adjust the length of the telescopic rod to match the inner diameter of the window frame and fix it on both sides of the window frame by applying pressure at both ends. Suitable for all window types, it does not require drilling or damaging the wall surface, but ensure the thickness of the rod matches the gap of the window frame.

4. Curtain Track Fixing Method
   Use expansion screws to fix the track on concrete or plaster walls, and then hang the curtain through pulleys. The most stable, it is suitable for heavy curtains or long-term use scenarios, but requires drilling for installation, which may cause slight damage to the wall surface.

5. Pressure Roller Fixing Method
   The special tool consists of gears and buckles, and the edge of the curtain is pressed tightly against the window frame by rotating the gears. Suitable for all types of windows and curtains, especially for metal walls, the curtains will not shake after installation.

III. Operating Steps

1. Measure dimensions: Choose curtain specifications based on the width and height of the window to ensure coverage of the window frame and leave appropriate margins.
2. Clean the surface: Wipe the window frame and wall with a damp cloth to remove dust and grease, ensuring the fixed parts are firmly attached or installed.
3. Install fixed parts: Install suction cups, hooks, tracks, or pressure rollers according to the selected method, focusing on checking the stability of corners and edges.
4. Hang curtains: Align the curtain hooks or rings with the fixed parts, gently pull to test the smoothness of sliding, and adjust to a symmetrical position.

Note: Avoid using methods such as removing the iron sheet of the container or supporting the curtain with bamboo, as these methods will undermine structural stability and pose safety hazards.