Honghe Outdoor Mobile Toilet Specifications
The specifications of outdoor mobile toilets in Honghe vary depending on the type, with common specifications as follows:
Single-person mobile toilets: The regular model typically has dimensions of 110cm in length, 110cm in width, and 230cm in height, approximately 1.1m×1.1m×2.3m. It is suitable for single-person use and is commonly found in outdoor settings such as ordinary parks, temporary construction site locations, and small event venues, fitting most moderately crowded scenarios like temporary exhibitions and outdoor markets. The mini single-person model has dimensions of 100cm in length, 100cm in width, and 220cm in height, and is mostly used in densely populated areas such as small exhibitions and commercial streets. Some information indicates that single-stall mobile public toilets usually occupy an area of about 1.2㎡ - 1.8㎡, with common internal clear dimensions of 1.2m - 1.5m in length × 1.0m - 1.2m in width, and a height generally between 2.2m - 2.5m.
Double-person mobile toilets: They typically have dimensions of 180cm in length, 110cm in width, and 230cm in height, allowing two people to use them simultaneously. They are suitable for team-building venues, outdoor camping areas, and other scenarios where multiple people need to use the toilet at the same time. Some sources say that the length of double-occupancy models can increase to about 2.5m, with the width remaining at 1.1m and the height still around 2.3m, suitable for large event venues that need to accommodate multiple users simultaneously. Other information shows that double-stall mobile public toilets occupy an area of about 3㎡ - 4㎡, with overall lengths mostly between 3m - 6m and widths usually between 1.5m - 2.5m.
Barrier-free mobile toilets: They are larger in size, generally with dimensions of 180cm in length, 150cm in width, and 240cm in height, providing space for wheelchair rotation, facilitating use by people with mobility impairments. They are commonly found in large parks and scenic spot entrances. Some sources state that barrier-free mobile toilets usually have dimensions of 1.5m×1.8m×2.4m, providing space for wheelchair entry and turning, specifically designed for scenic spots, large venues, and event sites that need to accommodate special needs. Other information mentions that the internal clear dimensions of barrier-free toilet stalls should not be less than 1.8m×1.4m, with a barrier-free ramp wider than 0.8m at the entrance and sufficient space for wheelchair rotation inside the stall.
In addition, there are small portable folding models that can be reduced in size to 1m×1m×2m, suitable for outdoor scenarios with limited space or only temporary use requirements.
