Back to blog
Article

Dimensions of Open-Air Mobile Toilets in Guangzhou

Admin October 08, 2026

The dimensions of open-air mobile toilets in Guangzhou vary depending on the type, as detailed below:

Single-unit Type: The external dimensions typically range from 1.0 to 1.5 meters in width, 1.2 to 2.0 meters in depth, and 2.2 to 2.8 meters in height; the corresponding internal dimensions are 0.8 to 1.2 meters in width, 1.0 to 1.5 meters in depth, and 2.0 to 2.5 meters in height. This type is suitable for independent use scenarios, such as parks and scenic spots, where the internal space can meet the basic needs of a single person.

Connected-unit Type:

  • Double-unit: The external width ranges from 2.0 to 3.0 meters (composed of two single units, each 1.0 to 1.5 meters wide), with a depth of 1.2 to 2.0 meters and a height of 2.2 to 2.8 meters; the internal dimensions of each single unit are the same as those of the single-unit type.
  • Triple-unit and above: The external width increases with the number of units (e.g., 3.0 to 4.5 meters for a triple-unit), while the depth and height remain the same as those of the double-unit. The internal dimensions of each single unit are also the same as those of the single-unit type. The connected-unit type is suitable for areas with high foot traffic, such as squares and event sites, where the combination of units enhances usage efficiency.

Special Function Type: Models equipped with sinks or water storage tanks have an external width of 1.0 to 1.5 meters, a depth of 1.5 to 2.5 meters, and a height of 2.2 to 2.8 meters, with internal dimensions slightly smaller than the external ones to accommodate equipment space. This design not only meets basic functional requirements but also adds sanitary facilities, making it suitable for scenarios with high hygiene standards.

Barrier-free Type: Specifically designed for individuals with disabilities, the external dimensions range from 1.5 to 2.0 meters in width, 2.0 to 2.5 meters in depth, and 2.5 to 2.8 meters in height, with internal space reserved for wheelchair turning (approximately 1.2 to 1.8 meters by 1.5 to 2.0 meters). The barrier-free design reflects humanistic care and is suitable for accessibility facilities in public places.

Single-person Type: The standard model typically measures 110 cm in length, 110 cm in width, and 230 cm in height; the mini single-person model measures 100 cm in length, 100 cm in width, and 220 cm in height; the single-person basic model centers around dimensions of 1.1 m by 1.1 m by 2.3 m (length, width, height). The single-person type is compact and suitable for scenarios with limited space, such as temporary construction sites and small events.

Double-person Type: The dimensions typically range from 180 cm in length, 110 cm in width, and 230 cm in height; the double-person shared model increases in length to approximately 2.5 meters while maintaining a width of 1.1 meters and a height of about 2.3 meters. The double-person type enhances usage capacity by extending the length and is suitable for areas with moderate foot traffic.

Small Portable Foldable Type: The dimensions can be reduced to 1 m by 1 m by 2 m. This design facilitates easy transportation and rapid deployment, making it suitable for emergency scenarios or temporary events.