Gaoqing Mobile Toilet Installation

The installation steps for mobile toilets in Gaoqing vary depending on the type, but the overall design focuses on simplicity and speed to meet the needs of temporary and highly mobile usage.

Installation Steps for Split-Type Mobile Toilets

1. Positioning the Chassis and Frame
   Use a forklift or manual labor to place the prefabricated steel chassis steadily at the designated location and adjust it to a level state using a spirit level. As the foundation of the entire toilet, the chassis must be stable to avoid tilting or shaking during subsequent installation.

2. Installing Walls and Roof Panels
   Insert the sandwich-panel wallboards into the slots of the chassis one by one and secure them with bolts or clips. Pay attention to the perpendicularity of the wallboard installation to avoid excessive gaps that may affect sealing. Then, install the roof panels, focusing on sealing the eaves and joints (e.g., using waterproof glue or sealing strips) to prevent rainwater leakage. The entire wall installation can usually be completed within 1-2 hours.

3. Connecting Internal Facilities
   Install internal partitions, toilets, flushing systems, sinks (if any), lighting, and ventilation equipment. Connecting water and electrical lines is a critical step that should be performed by professionals, but modular design (e.g., quick connectors) can significantly reduce the time required. For example, the flushing system needs to be tested for water pressure stability, the electrical circuit needs to be checked for grounding protection, and the ventilation equipment needs to ensure adequate airflow.

4. Functional Inspection and Debugging
   Conduct a flushing test (check for smooth drainage), an electrical circuit test (test switches and sockets for normal operation), and a sealing test (simulate rainfall by spraying water to test the eaves and wall joints). Only after all functions are normal can the toilet be put into use.

Installation Steps for Integrated Mobile Toilets

Integrated mobile toilets (e.g., container-type toilets) have completed interior decoration and equipment integration in the factory, making on-site installation simpler:

1. Lifting and Positioning: Use a crane to lift the entire toilet to the designated location, adjust the direction, and secure it.
2. Connecting Water, Electricity, and Sewage Pipes: Connect to municipal water supply, drainage, and power sources. The modular interface design can shorten the installation time to 2-4 hours.

Advantages of Special-Type Installation

Some mobile toilets do not require digging a septic tank or complex civil engineering work. They use a column-splicing fixation method, with an installation process similar to "building blocks," achieving a one-step completion that further simplifies the process and is suitable for emergency or temporary scenarios.