Fiberglass Mobile Toilet Specifications

The common specifications for fiberglass mobile toilets are as follows:

1. 1100×1100×2350 mm
This specification is the basic model of fiberglass mobile toilets, with a cuboid structure. Both the length and width are 1100 mm, and the height is 2350 mm. Its compact design makes it suitable for places with limited space, such as small construction sites and temporary event venues. The height setting takes into account both the comfort of adult users and structural stability. The interior space can accommodate a standard squat toilet or a sit-down toilet, with some room for movement.

2. White model 1100×1100×2500 mm
This specification has the same width and length as the basic model, but the height is increased to 2500 mm. The increased height is mainly to optimize internal ventilation or to install higher-specification exhaust equipment, while also providing space for adding decorative structures or lighting systems on the top. The white exterior is usually used in scenarios with high aesthetic requirements, such as scenic spots and commercial streets. Moreover, the white material reflects sunlight more easily, reducing the interior temperature in summer.

3. 1300×1100×2400 mm
In this model, the width is expanded to 1300 mm, the length remains 1100 mm, and the height is 2400 mm. The increased width significantly enhances the interior horizontal space, allowing for wider toilets or the addition of barrier-free facilities (such as handrails). It is suitable for public places with high foot traffic, such as transportation hubs and large exhibitions. The height is moderate, balancing structural strength and user convenience.

4. 1.3×1.3×2.05 m (i.e., 1300×1300×2050 mm)
This specification is marked in metric units, with a length and width of 1.3 m each and a height of 2.05 m. Its square design results in a more balanced distribution of interior space, making it suitable for multi-functional toilets that need to install both a squat toilet and a sink or storage cabinets simultaneously. The reduced height to 2.05 m may be optimized for specific scenarios (such as underground spaces or height-restricted areas), while also reducing material costs.

5. 1200×1000×2400 mm
This model has a length of 1200 mm, a width of 1000 mm, and a height of 2400 mm. Its length-to-width ratio is more slender, making it suitable for placement along walls or in narrow corridors. Reducing the width to 1000 mm may sacrifice some horizontal space, but by optimizing the interior layout (such as using wall-mounted toilets), it can still meet basic usage requirements. It is applicable for renovations in old residential areas or temporary emergency scenarios.

All the above specifications are designed based on the lightweight and corrosion-resistant properties of fiberglass. The actual choice should be comprehensively evaluated based on the usage scenario, foot traffic, and functional requirements.