Convenient Mobile Toilet Production

Convenient mobile toilets can be made using water storage buckets or water storage tanks along with pallets. Here are the specific methods:

Production Using Water Storage Buckets

1. Basic Structure Construction: Take out a water storage bucket from home and use an angle grinder to split it in half lengthwise. Fix universal wheels at the four corners of a wooden board for easy mobility. Take several wooden strips and firmly attach them to the upper side of the bucket using self-tapping screws to increase the bucket's height.
2. Door and Wall Construction: Use an angle grinder to create a doorway on the side of the water storage bucket. Install foam strips on both sides of the doorway to form a door frame. Take a piece of plastic soft board and insert it between the wooden strips to form an elevated wall. Place the upper half of the water storage bucket steadily on top of the wooden strips to form a roof. To enhance aesthetics, paint the wooden strips with white waterproof paint.
3. Door and Drainage Device Installation: Use foam strips to拼接 (assemble, here it means拼接 in Chinese, we can use 'join' to express similar meaning) two discarded honeycomb wooden boards to form a simple door. Use a hole-opening tool to create a hole at the bottom of the bucket and install a drainage pipe to form a floor drain. Create holes on the side and bottom of a plastic bucket and connect them with direct fittings. Place the plastic bucket on top of the roof to form a small water storage device.
4. Bathroom and Sewage Facility Installation: Connect the water pipes made for the bath heater. Install a three-way fitting below the water inlet pipe and connect it to a showerhead. Place the toilet on the hole of the drainage pipe and install the water tank. Secure the toilet with glass glue and connect the drainage pipe to the sewage bucket. Horizontally connect a water pipe to the three-way fitting of the water outlet pipe and extend it to the doorway as the water inlet pipe for the sink. Create a hole in the door and install a fitting.

Production Using Water Storage Tanks and Pallets

1. Pallet Preparation: Simply take out a plastic pallet and use tools to fix a universal wheel at each of the four corners at the bottom of the pallet to enable flexible movement. However, this method only mentions the installation of the pallet and universal wheels. Further construction of the toilet's main structure is required by combining it with components such as water storage tanks, such as placing a water storage tank as a water storage device and installing a toilet and drainage pipes. The specific operations are not detailed and can be completed by referring to the relevant steps in the method of using water storage buckets.