Container House Side Beam Design Drawing

Currently, we cannot directly provide the design drawing of the side beam for container houses, but we can offer relevant design ideas and reference information.

Side Beam Material Selection

The modular office building 2.0 version in the factory area of COSCO Shipping (Nantong) Co., Ltd. uses 6-millimeter steel plates bent into shape as side beams, replacing traditional heavy square tubes. The main advantage of this design is the dual improvement in lightweighting and structural stability. While ensuring sufficient strength, the 6-millimeter steel plate reduces the overall weight of the structure, facilitating transportation and installation. The bending process further enhances the rigidity and stability of the side beams, enabling them to better withstand external loads and deformations.

Design Ideas

• Structural Optimization: As one of the main load-bearing components of container houses, the design of side beams must fully consider structural rationality and stability. By using bent steel plates, the cross-sectional shape of the side beams can be optimized, improving their bending and torsional resistance. Meanwhile, reasonable bending angles and size designs can effectively disperse stress and reduce local stress concentration.
• Lightweight Design: Under the premise of ensuring structural stability, minimizing the weight of side beams is an important design goal. The use of 6-millimeter steel plates and the choice of bending process are both aimed at achieving this goal. Lightweight design not only reduces transportation and installation costs but also improves the overall energy efficiency and environmental performance of the house.
• Standardization and Modularization: The design of container houses should follow the principles of standardization and modularization to facilitate large-scale production and rapid assembly. As part of the house structure, side beams should also comply with these principles. By adopting standardized dimensions and interface designs, rapid connection and disassembly of side beams with other components can be achieved, improving construction efficiency.

Precautions

Since we cannot directly provide the design drawing, it is recommended to refer to relevant industry standards and technical specifications during the actual design process and conduct customized design based on specific usage requirements and site conditions. At the same time, ensure that the design drawings are reviewed and confirmed by professional engineers to guarantee their safety and reliability.