Portable Toilets for Construction Sites

There are various types of portable toilets for construction sites, and their production methods also differ. Here is a detailed introduction to several common types and their production key points:

Portable Toilet Made from Water Storage Tanks and Pallets

This type of portable toilet is relatively simple to make and has a low cost. First, fix universal wheels at the four corners of the bottom of the pallet for easy movement. Then, place the water storage tanks retrieved from garbage stations and use an angle grinder to cut along the marked lines on the tops of the tanks to form open-top tanks. Stack two open-top water storage tanks upside down and fix the outer frame with self-tapping screws. Cut out a rectangular opening to form the doorway. Drill a hole in the floor inside the water storage tank, insert an elbow, and connect a water pipe. Install and fix the toilet. Fix the water pipe on the wall with clamps and install a faucet. Connect a water pipe to the pipe cap, drill a hole, and install a stainless-steel basin as the hand-washing basin. Connect the water inlet pipe of the toilet tank and the shower hose, install the toilet seat, and a showerhead made from a water pipe. Finally, make the toilet door with wooden boards and hinges and install a door handle. This production method makes full use of waste materials and is suitable for construction sites with a limited budget and low requirements for toilet functions.

Customized Portable Toilets

For example, Dezhou Hongtu Metal Products Co., Ltd. once customized a portable toilet for a customer in Zhejiang. It can be designed according to actual needs. For instance, based on the gender ratio and usage requirements of construction site personnel, the number of squatting positions can be reasonably set. In this case, since there were more male workers than female workers in the factory, 1 squatting position was reserved for women and 7 for men. Customized portable toilets can better meet the special needs of different construction sites, but the production period may be relatively long, although there are also cases of urgent completion.

4 + 1 Step-style Portable Toilet

It has a total of 4 squatting positions, with an open-style hand-washing area in the middle. The exterior wall is made of heat-insulating and flame-retardant metal carved panels. The surface is a colored relief decorative metal panel treated with a special coating, which is not only beautiful but also has good heat insulation and flame-retardant properties. The side door is made of titanium-magnesium alloy, which is sturdy and durable. The hand-washing area is equipped with a complete set of bathroom cabinets for convenient use. The interior wall of the toilet is made of bamboo-wood fiber panels, which are environmentally friendly and easy to clean. It is equipped with exhaust fans, paper towel dispensers, and hooks, and the floor is made of anti-slip tiles to ensure safety during use. In addition, it can also be customized according to special needs to meet the diverse requirements of different construction sites.